Hitch for 2017 Buick Envision Premium With Dual Exhaust

Question

Question:

I have the above vehicle. Premium II’s have dual exhaust. Your video shows a single drivers side exhaust. Curious if this item will fit my car. Thx

asked by: Dave

0

Expert Reply:

I reached out to my contact at Curt and confirmed that the Curt # C13292 hitch will fit on your 2017 Envision with dual exhaust.

Now that you have a hitch you can use the Thule # TH9058 “Camber” 2-bike rack or the Swagman # S63380 “Trailhead” 4-bike rack. Each rack has the “Tilt” feature to allow access to the rear of the vehicle, and an anti-rattle hitch pin for a quiet ride.

You could also add a small cargo carrier like the Curt # C18145 which will help you free up interior space when it it time for a road trip. This carrier just plugs into your hitch receiver, and can be used on your other vehicles with a hitch as well.

OR tow a small trailer like the Detail # K2MMT4X6 utility trailer. This is perfect for hauling home bags of mulch, a new dishwasher, a riding mower, or all the stuff for a camping weekend.

If you are going to tow a small trailer you will need a trailer lighting electrical connector like the Curt # C56364 wiring harness. The kit requires a factory tow wiring plug be present under the vehicle. This was not a standard feature. I have attached a video of this package being installed on a 2017 Envision and at the 2:10 mark you can see where the location of this plug is at. If your vehicle does not have this plug just email me back for a different solution.

You may also be interested in the etrailer ball mount kit # 989900.

expert reply by: Les D

0

Answer 1

The factory connection on your 2022 Buick Envision is located behind the rear bumper cover. You will need to locate the wiring that comes out of the center of the body and follow the wiring toward the drivers side to the connector with the dummy…

view full answer...

Answer 2

The 4-pole trailer connector will end up in the back of the vehicle but the vehicle connection can be found under the vehicle, on the driver side. This will allow you to connect your trailer or accessory to the 4 pole wiring right at your hitch to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Hitch for 2017 Buick Envision Premium With Dual Exhaust

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching