Is Gen-Y Torsion Weight Distribution Shank Compatible With Equal-i-zer Weight Distribution System?

Question

Question:

IN YOUR OPINION WHICH IS THE BEST WEIGHT DISTRIBUTION HITCH WITH ANTI SWAY THAT I SHOULD BUY FOR MY 25FT TT. PRICE DOESNT MATTER. THANKS,

asked by: MARK V

0

Expert Reply:

I believe you were asking about the Gen-Y Torsion Weight Distribution Shank # 325-GH-1302 because there is not a Gen-Y hitch that fits your 2018 Ram 2500. If so, the answer is yes, you can absolutely use that shank with an Equal-i-zer weight distribution system such as the Equal-i-zer # EQ37101ET.

You will need to find the best weight distribution system for your Rockwood 2507S. In order to choose the best system you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your Ram.

The tongue weight is typically between 10% and 15% of your trailer's GVWR but you'll want to verify it by using a scale such as the etrailer # e99044 or by using one of the methods outlined in the help article on determining tongue weight I've linked for you. From there, simply add on the weight of the cargo behind the rear axle of your vehicle and you'll have your TTW. The ideal system would be one in which your TTW would fall somewhere in the middle of the weight distribution system's tongue weight capacity.

From my research your Rockwood 2507S has a GVWR of just over 6,700 lbs and depending on the cargo you have behind your rear axle, the Equal-i-zer # EQ37101ET I referenced earlier could be a great choice as it is designed for total tongue weights between 600 lbs and 1,000 lbs. It comes with everything you need for installation though it is recommended you use thin-walled socket # EQ70-00-4800 for installation of the hitch ball.

I've added links to video reviews of these parts for you to take a look at, as well as a link to our selection of Equal-i-zer systems without shanks for you to check out should you need something with a different tongue weight capacity.

expert reply by: Kyle S

0

Mark

4/4/2018

IN YOUR OPINION WHICH IS THE BEST WEIGHT DISTRIBUTION HITCH WITH ANTI SWAY THAT I SHOULD BUY FOR MY 25FT TT. PRICE DOESNT MATTER. THANKS,

Reply

Kyle S.

4/4/2018

Like I mentioned earlier, I recommend the Equal-i-zer weight distribution systems which use clamp-on brackets so you won't have to drill along your trailer frame. The Equal-i-zer allows you to back up with the system on, is compatible with both electric and surge brakes, and prevents sway instead of just manages it with 4 points of sway control via friction in the spring bars. Our customers who have used this system regard it very highly, with well over 200 reviews it has averaged nearly 5 out of 5 stars. Keep in mind that you will need to know your total tongue weight before choosing the right system, such as the # EQ37100ET (which is a system that includes the shank) if your total tongue weight was in the 800 lb range. I've added a link to a video review of this system for you to check out as well as a link to our page with each of our Equal-i-zer systems.

Reply

Answer 1

I verified with Gen-Y hitch that their torsion ball mounts, like part #325-GH-1225, can be used with other manufacturer's weight distribution systems, however it isn't the best option. Instead of one of the torsion ball mounts I…

view full answer...

Answer 2

Rather than looking at separate systems you can use the Gen-Y Torsion Weight Distribution Shank #GY54FR to combine with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37101ET. This will give you the smoother ride and retain the sway…

view full answer...

Answer 3

Yes the Gen-Y Torsion Weight Distribution Shank part #325-GH-1202 has been designed for use with weight distribution systems and the holes are on the same 1.25" separation meaning the will fit together with no issues and give you a nice…

view full answer...

Answer 4

We do have an option for you, though there isn't a standalone cushioned ball mount like the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount #C45949-22516 that is compatible or rated for use with a weight distribution system. What you can…

view full answer...

Answer 5

Most weight distribution systems mount on shanks that are 2" wide and have mounting holes that measure 1-1/4" apart on center. I spoke with my contact at Gen-Y Hitch who confirmed that the Torsion Weight Distribution Shank for 2-1/2"…

view full answer...

Answer 6

Yes. The Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2" Receivers #325-GH-0352 has 1-1/4" spaced holes on the shank the same as a standard weight distribution hitch, so it will be compatible with the Equal-i-zer…

view full answer...

Answer 7

We can get you set up with the right ProPride P3 hitch, and for your 1,000 lb tongue weight, the best hitch is the following part number: - ProPride 3P Weight Distribution Hitch with Sway Control #PR97QR This is the correct ProPride hitch for your…

view full answer...

Answer 8

Usually when we see cracking around the sidewall of a trailer tire it means it is starting to dry rot and needs to be replaced with a new tire, like the Westlake 235/80R16 #WE76FR. Tires have a lifespan of 3-6 years or 10,000-12,000 miles, whichever…

view full answer...

Answer 9

We do have the correct Gen-Y Torsion shank for your trailer with a GVWR of just about 10,000 lbs, though the Gen-Y Torsion Weight Distribution Shank #GY54FR you mentioned is for loaded tongue weights between 450 lbs and 1,100 lbs, which you are very…

view full answer...

Answer 10

Bearings get hot from friction of the hub spinning around them on the spindle. Grease like #L54FR is used to lubricate the bearings which reduces the friction and helps keep everything cool. There is also a bearing packer, #L70025, that you would use…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...