Recommended Strap For Fulton Single Speed trailer Winch F142201

Question

Question:

I am looking to purchase winch part number F142201. What strap do I need to purchase for this winch?

asked by: Chris T

0

Expert Reply:

For the Fulton Single Speed Trailer Winch # F142201 I recommend the Fulton Heavy-Duty Winch Strap with Hook # FWS20HD0200 which has a 4000lb working load limit (WLL) and will fit perfectly in the drum of the # F142201.

I included a video for both of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part #315-W1800D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide. I have attached a photo of these measurements for you as well. If…

view full answer...

Answer 2

The CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4" #CE32100G can simply have a pal nut removed to pull out the pin and remove the roller and then install the bracket. Reinstall the pin and roller with…

view full answer...

Answer 3

The CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4" #CE32100G has a keel roller that can be removed. If removed, you will require a Replacement Cap Nut 5/8 inch like found in the Roller Shaft with Pal…

view full answer...

Answer 4

I went out to our warehouse to take some measurements of the mounting base on the Fulton Single Speed Trailer Winch #F142306. The plate itself measures 6 inches long and 4 inches wide. The mounting pattern features a few oblong holes that allows it…

view full answer...

Answer 5

We sure do, I'd recommend the #HP52FR bunk bracket and u-bolts like #CE15283GA-2. We also offer pre-carpeted bunks in various lengths, as part #CE27800 for a 3 foot, #CE27810 for a 4 foot, #CE27820 for a 5 foot, #CE27840 for a 6 foot and…

view full answer...

Answer 6

The mounting plate on the Fulton Single Speed Trailer Winch #F142201 is 5-3/8" long and 3-9/16" wide. The total height of the unit is 6-1/8" tall. I've also linked our review video for this winch that gives the overall dimensions…

view full answer...

Answer 7

The Fulton Single Speed Winch #F142306 appears to be the closest winch that we have to the one in the picture with the CE Smith Bow Roller Bracket for Winch Stands #CE31005PG. It has a similar mount and frame connection with the crank handle and…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Recommended Strap For Fulton Single Speed trailer Winch F142201

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching