Is It Possible to Add an Axle to a Single Axle Trailer
Question:
I have a ? Is it possible to add another axle to a Single trailer it’s a 5x10
asked by: Francisco
Expert Reply:
It is possible, but you'll need to use the linked formula to determine the correct axle placement. Because you're adding an axle, you'll likely need to remove the existing spring hangers and reposition things so that the center spring hanger sits right about where the original single axle used to sit, but the formula will walk you through that.
Also, keep in mind that if you add an additional axle with the same capacity as the existing, you won't necessarily double the weight capacity of the trailer. You still might be limited by the capacity of the coupler or the structure of the trailer itself.
You'll also need new spring hangers and you'll need to add an equalizer and springs but the specific parts needed will depend on the capacity of the axles used.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Article: Where to Position the Trailer Axle?
- Video: Dexter Heavy Duty Suspension Upgrade Kit Review
- Video: Review of Dexter Trailer Leaf Spring Suspension - Suspension Kits - K71-359-00
- Search Results: bushings
- Shop: Vehicle Cargo Control
- Shop: Headache Rack
- Shop: Tool Box
- Shop: Gooseneck Hitch
- Shop: Trailer Wiring
- Shop: Floor Mats
- Shop: Replacement Lube Plug for DeeMax Grease Caps - Qty 1
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 1.98" Outer Diameter
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Shop: Base Plate for Tow Bar
- Shop: CargoSmart Forged Steel D-Ring Tie-Down Anchor - Weld On - 1/2" x 3-3/8" - 4,000 lbs
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range D
- Video: Yakima JetStream Crossbars Installation - 2022 GMC Sierra 1500
- Q&A: How to Pick Out 3,500 lb Trailer Axle from Dexter 51955
- Q&A: Hanger Placement on the Tandem HAnger Kit part # APT8
- Search Results: tandem axle trailer fenders
- Search Results: 10k electric trailer jack
- Search Results: 12k electric jack
- Q&A: How to Reduce Porpoising Effects When Towing Travel Trailer with 2020 Ford F-150
- Q&A: How To Install 12 Volt Power Outlet In Truck Bed
- Video: Air Lift LoadLifter 5000 Rear Air Helper Springs Installation - 2021 GMC Sierra 1500
- Q&A: How to Determine Spring-Center and Hub-Face Measurements when Building a Trailer
- Video: B and W Turnoverball Underbed Gooseneck Trailer Hitch Installation - 2021 GMC Sierra 1500
- Q&A: Does Adding a Second Axle to Trailer Increase Weight Carrying Capacity