Curt Weight Distribution Shank Recommendation for a Draw Tite WD Trunnion System
Question:
Have an old Drawtite WD system trunnion bars and a new truck. Height from top of new truck receiver to ground = 18 Height from bottom of old trailer coupler to ground = 15 I should need a of 3 inches if I have done the measurements correctly. This hitch shaft should give me the necessary and a little room for other potential future adjustments and fit the Drawtite HD head 1 1/4 inch spaced holes, correct ? Thank you for your help !
asked by: Pat
Expert Reply:
Your math is good, and the Curt Weight Distribution Shank part # 17120 should work very well for you based on that. This shank can do a max drop of 5-3/4 inches.
I attached an FAQ article on picking out the correct rise/drop ball mount plus an FAQ weight distribution systems.
Product Page this Question was Asked From
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 9 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Search Results: weight distribution shank
- Q&A: How to Determine the Correct Rise Drop Ball Mount for Towing a 24 ft Car Hauler
- Q&A: Is It Possible to Add an Axle to a Single Axle Trailer
- Q&A: Weight Distribution Shank for a 9-1/2 Rise with Pro Series Round Bar System
- Q&A: Will Curt Weight Distribution Shank with with Fastway e2 Weight Distribution System
- Q&A: Measurement from Top of Shank to Center of Top Hole
- Q&A: Can A High Low Adapter Be Used With Weight Distribution System
- Q&A: Choosing the Correct Adjustable Shank for Weight Distribution System On a 2019 GMC Sierra 2500
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: Edge Insight CS2 Comprehensive Gauge Display - Color Screen
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Floor Mats
- Video: Choosing the Right Trailer Wiring
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Search Results: weight distribution hitch
- Article: Most Popular Wheel Bearings
- Search Results: fender
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Search Results: trailer jack
- Article: Trailer Tire Sizing
- Search Results: l68149
- Video: B&W Continuum Weight Distribution System Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
