Capacities of etrailer e95ZR Hitch on a 2021 Hyundai Palisade

Question

Question:

Hi, I would like to know what the weight distribution capacity and the other weight capacity for the towing hitch for the Hyundai palisade is. I know the tounge weight the car can take is 350lbs but your hitches stare 750 so can I load this then due to the weight distribution? Thanks for your help.

asked by: Silke

0

Expert Reply:

For the etrailer Class III hitch that you'd looked at, part # e95ZR the capacities are 500 lbs tongue weight/5000 lbs towing or 750 lbs of tongue weight and 6000 lbs towing if used with weight distribution.

This being said, you'll be limited to the 500 lb tongue weight capacity that's stated in the owner's manual. Using a weight distribution hitch can raise the tongue weight capacity of the hitch, but you still would need to abide by the manufacturer's specified towing capacity.

expert reply by: Mike L

0

Answer 1

I checked with the manufacturer and was able to confirm the fit for your 2023 Hyundai Palisade is the Curt Trailer Hitch Receiver #C13427.

view full answer...

Answer 2

I recommend the etrailer Trailer Hitch Receiver #e95ZR for your 2023 Hyundai Palisade. I like the etrailer hitch over the others that we offer because it has a hidden design that will give you a clean off the factory look when the hitch is…

view full answer...

Answer 3

The best hitch for your 2023 Hyundai Palisade is going to be the etrailer Hitch item #e95ZR. This hitch is custom fit and bolts to your Hyundai with included hardware. I really like the etrailer hitch because the crossbar installs behind your rear…

view full answer...

Answer 4

This is very common in hitches like the etrailer Hitch part #e95ZR. It is done to eliminate the need to trim the bumper cover and still get as much ground clearance as possible. It is likely that the bumper cover will get few blemishes on it since it…

view full answer...

Answer 5

To install trailer wiring on your 2023 Hyundai Palisade you'll need the T-Connector Wiring Harness #C43FV which tees in behind your tail lights and pulls power directly from your vehicle battery via the included lead wire. I also recommend…

view full answer...

Answer 6

Yes, the etrailer Hitch item #e95ZRdoes fit the 2022 Hyundai Palisade Calligraphy. This custom fit hitch bolts directly to your Palisade with included hardware and does not require drilling or welding. This hitch has a 500 lbs tongue weight capacity…

view full answer...

Answer 7

Yes, Per the manufacturer The etrailer Trailer Hitch Receiver #e95ZR is confirmed to fit behind the removable cover on the 2023 Hyundai Palisade. The wiring harness has been changed, The Curt Wiring Harness #CU94FR is confirmed to fit your 2023…

view full answer...

Answer 8

I recommend the etrailer Trailer Hitch Receiver #e95ZR as being the best receiver available for your 2022 Hyundai Palisade. It has the highest available weight capacity at 750lbs of tongue weight and 5,000lbs towing. With a weight distribution hitch…

view full answer...

Answer 9

I would be happy to help you and understand the concern you have. The Curt item #C13427 has 11" of ground clearance from the bottom of the 2" x 2" hitch receiver. This hitch is confirmed to fit your 2023 Palisade and bolts to it with…

view full answer...

Answer 10

Congrats on the new vehicle! The best hitch to haul a bike rack on your 2023 Hyundai Palisade is going to be the etrailer Trailer Hitch Receiver item #e95ZR. This hitch is custom fit and bolts to your Hyundai with included hardware. It does not…

view full answer...

Answer 11

The etrailer Hitch item #e95ZR you were looking at is confirmed to fit all models of the 2021 Hyundai Palisade, including your Calligraphy model, so the hitch will fit just fine. The #e95ZR has a 500 lbs tongue weight rating and 5000 lbs trailer…

view full answer...

Answer 12

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e95ZR does not require any trimming or modification to your bumper molding or fascia. You will, however, need to remove the passenger side plastic molding…

view full answer...