etrailer Class III Trailer Hitch Installation - 2020 Hyundai Palisade Video

For your 2020 Hyundai Santa Fe that's equipped with the factory tow package, the trailer wiring harness is the Curt T-Connector #CU94FR. This custom harness is going to plug right into that factory tow port beneath the vehicle, on the…

I recommend the etrailer Trailer Hitch Receiver #e95ZR for your 2023 Hyundai Palisade. I like the etrailer hitch over the others that we offer because it has a hidden design that will give you a clean off the factory look when the hitch is installed.…

I checked with the manufacturer and was able to confirm the fit for your 2023 Hyundai Palisade is the Curt Trailer Hitch Receiver #C13427.

I would be happy to help you and understand the concern you have. The Curt item #C13427 has 11" of ground clearance from the bottom of the 2" x 2" hitch receiver. This hitch is confirmed to fit your 2023 Palisade and bolts to it with…

The trailer hitch I recommend for a 2020 Hyundai Palisade is the etrailer Trailer Hitch Receiver part #e95ZR. The etrailer hitch offers a bolt-on install with no cutting, drilling, or welding required. It has a hidden design so the only thing shown…

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e95ZR does not require any trimming or modification to your bumper molding or fascia. You will, however, need to remove the passenger side plastic molding…

To install the etrailer Trailer Hitch Receiver #e95ZR on your 2023 Hyundai Palisade you will have to do some trimming. This is going to be needed on the underbody panel which attaches to your frame so it will not be seen. I have linked an…

When installing The etrailer Hitch #e95ZR onto your 2023 Hyundai Palisade, it does require some fascia trimming but it is not too bad. When looking at the instructions box 3 while using a tape measure, marker, and utility knife measure, mark, and…

Yes, Curt lists their hitch part #C13396 as a fit for all models of the 2018 Land Rover Discovery so it will fit and work well on your HSE model. I attached an install video for this for you to check out as well.

The best hitch for your 2023 Hyundai Palisade is going to be the etrailer Hitch item #e45ZR. This hitch is custom fit and bolts to your Hyundai with included hardware. I really like the etrailer hitch because the crossbar installs behind your rear…

This is very common in hitches like the etrailer Hitch part #e95ZR. It is done to eliminate the need to trim the bumper cover and still get as much ground clearance as possible. It is likely that the bumper cover will get few blemishes on it since it…

For the etrailer Class III hitch that you'd looked at, part #e95ZR the capacities are 500 lbs tongue weight/5000 lbs towing or 750 lbs of tongue weight and 6000 lbs towing if used with weight distribution. This being said, you'll be limited…