Propane Tank Lock for Airstream Flying Cloud Travel Trailer

Question

Question:

Looking to purchase propane lock for 2021 flying cloud 25ft airstream. Not sure what size would be needed! Thank you for your assistance and hope to hear from you soon

asked by: Jeannette S

0

Expert Reply:

If your Airstream has the dual tank setup with the hold down that uses 3/8 inch threaded rod, you'll want to use the # TLA7771 lock. For a 1/2 inch threaded rod, use # TLA7770. I've provided a diagram showing how the lock goes together and fits on the rod of the tank hold down.

If the hold down is aftermarket, and wasn't manufactured by Airstream, use part # BA62VR.

I've linked to demonstration videos for the products mentioned above.

expert reply by: Mike L

0

click to enlarge

Answer 1

I spoke with my contact at Ventline regarding installing the Replacement Fan Motor #BVD0278-00 on your Range Hood. He stated that after removing the 4 screws that are holding the hood to the cabinet, you will then want to use a flat tool to…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 4

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 5

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 6

To determine which brake assemblies would be needed, you will need to measure your existing brake drums as shown in the provided photo. Since your trailer has a 14,000 lb capacity, you most likely have tandem 7,000 lb axles, which typically use a…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...