Weight of TorkLift Truck Bed Camper Tie Downs for 2005 Ford Super Duty Truck

Question

Question:

I would like to know the weight of the TLF2007 and the TLF3004 tie downs please. I already have them on my truck. Thank you.

asked by: Craig T

0

Expert Reply:

The TorkLift # TLF2007 weighs just under 35 lbs and the # TLF3004 weighs just under 25 lbs minus the packaging.

expert reply by: Mike L

0

Answer 1

Your slide-in truck camper does not have electric brakes so the blue brake circuit wire from its 7-way connector is not used. All other lighting functions as well as 12V auxiliary power will be maintained on the other circuits. Please refer to the…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 6

You'll need to do some slight measuring to ensure the fit of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV on your 4WD 2022 Ford F-350 FX4 dually. Just measure from the top of the rear axle to the top of the jounce…

view full answer...

Answer 7

The difference is Item #TLF2007 is designed for a 6-3/4 bed on a 2004 Ford F-250 and Item #TLF2011 is designed for an 8' bed. The mounting location are different between the two bed sizes. Since your bed is 6-3/4 it would require Item #TLF2007.

view full answer...

Answer 8

Since the 7-way round pin plug is obsolete, your best bet would be to replace the connector on your camper with the common 7-way blade style connector. You'd remove the existing plug on your slide in camper, and replace it with #A7WCB. You could…

view full answer...

Answer 9

Thank you for providing a photo of your hitch cross tube's open ends. Yes, this is where the TorkLift Camper Tie-Down #TLF3001 will install. The linked installation instructions show the process with clear color photos to detail the install…

view full answer...

Answer 10

Inserts are not sold individually so you'd need the whole tie-down kit. For your 2001 Ford F-350 the rear tie-down is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLF3001. The front will depend on your bed length, and so long as you…

view full answer...

Answer 11

The main difference between the Torklift Locking FastGun Turnbuckles, #TLS9522-2-LK, and the AnchorGuard Derringer Turnbuckles, #TLS9020, is how the camper tie-downs are mounted on your truck. The FastGun #TLS9522-2-LK are designed to be used with…

view full answer...

Answer 12

The Derringer set you referenced is only available in a set of 4 that has two longer and two shorter turnbuckles but we do have the Torklift Springload part #TLS9050A which is a set of two that has a range of 35 to 45 inches which is similar to the…

view full answer...

Weight of TorkLift Truck Bed Camper Tie Downs for 2005 Ford Super Duty Truck

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching