How Does Install Hardware Thread Through Frame for Trailer Hitch for 2017 Dodge Durango

Question

Question:

Hi! What tool is best suited to get the bolt and spacer plate/washer into the hitch? While it is situated inside the frame of a 2017 Dodge Durango?

asked by: Jason M

1

Helpful Expert Reply:

The method to get the bolt and spacer through the frame of your 2017 Dodge Durango is called "fishwiring" which you can see the entire process outlined in the install video link I attached.

expert reply by: Jameson C

1

Answer 1

The Draw-Tite Class III Max Frame Receiver Hitch part #DT38MR does require the removal of a 20" spare tire. The hitch is designed to fit with a stowed 18" tire but not 20" so it will not be able to remain stowed under the vehicle.…

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR for your 2015 Dodge Durango R/T is a great option. The safety chain connections are made behind the bumper, so they will go underneath. Some models like the photo you see can remain untrimmed and…

view full answer...

Answer 3

The round or trunnion bars refers to the end of the spring bars. Round bars are typically designed for lighter applications, are a bit harder to install and are usually priced lower than trunnion bars. Trunnion bars are typically designed to be used…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

How Does Install Hardware Thread Through Frame for Trailer Hitch for 2017 Dodge Durango

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching