Hitch Recommendation For A 2016 Ford Focus SE Hatchback
Question:
Choosing between Drawtite 24872 and Curt C11158 for 2016 Focus SE Hatchback. I am wanting to use a platform bike rack with one of these and wanted to make sure I could use a Class 2 with these?
asked by: Kevin L
Expert Reply:
We do have a couple of solutions for your 2016 Ford Focus SE Hatchback application. Keep in mind, all of the hitches designed for your Focus SE are Class I, such as the Curt # C11158 which has a 1/1-4" receiver tube, 200 lbs. of tongue weight, and 2000 lbs. of gross trailer weight.
If you're determined to use a Class II bike rack with this Curt hitch, it is possible. Curt hitches do not come with the weld stop inside the receiver tube that is otherwise typical of Class I hitches, which acts as a safety lockout for larger Class II (and above) accessories. Liberated from this weld stop restriction, as long as you remain within the weight capacity of the hitch and rack, using specifically the Curt hitch, you'll be fine. If your Class II bike rack requires a 2" receiver, you can use an adapter like the # HTAD, but keep in mind that using this adapter will reduce your tongue weight capacity by 50%, or 100 lbs.
Sticking with Class I accessories originally designed to work with your vehicle's hitch, my platform bike rack recommendation to you is the Hollywood Racks Destination Two-Bike Rack # HLY94FR. Fully loaded with two 35 lb. bikes, this rack has a loaded tongue weight of 90 lbs. Your hitch will be more than ready to handle this load.
In general, Class I hitches are not recommended by bike rack manufacturers to haul more than two bikes at a time.
If you're looking to haul more bikes or more cargo than what a Class I hitch will support, you should also consider a solution such as a roof rack kit with Rhino-Rack Vortex Aero Crossbars # RRVA126B-2, 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA, and the Custom DK Fit Kit # DK307. These products open up the possibility of using a product like the Rhino-Rack XTray Pro # RRRMCB03 which can haul two bikes or more cargo.
Products Referenced in This Question
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
- Roof Rack
- Fit Kits
- 4 Pack
- Rhino Rack
more information >
Hollywood Racks Destination Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Frame Mount
- Hitch Lock
- 2 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Hollywood Racks
more information >
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 7-1/4 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- Brophy
more information >
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
- Roof Rack
- Feet
- 4 Pack
- Rhino Rack
more information >
Rhino-Rack XTray Pro Cargo Basket and 2 Bike Carrier - Steel - 58-1/4" x 41" - 165 lbs
- Roof Bike Racks
- Fork Mount
- 15mm Thru-Axle
- Locks Not Included
- Aero Bars
- Factory Bars
- Round Bars
- Square Bars
- Disc Brake Compatible
- Clamp On - Standard
- Black
- Rhino Rack
more information >
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2
- Roof Rack
- Crossbars
- Aero Bars
- 49 Inch Bar Space
- 2 Bars
- Overhang
- Black
- Rhino Rack
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 55001
- Search Results: 45521
- Search Results: 36061
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Brake Controller
- Shop: Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
- Shop: Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Shop: Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
- Shop: Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Shop: Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 2,000 lbs
- Video: Hollywood Racks Hitch Bike Racks Review - 2021 Mazda CX-5
- Video: Trailer Wiring Harness Installation - 2001 Ford Focus
- Video: Curt Class II Drawbar Review C45521
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer hitch
- Search Results: hitch
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Search Results: brake controller
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer brake controller
- Video: etrailer Hitch Pin Alignment Collar Review