Recommended Thule AirScreen For 53" Thule SquareBar Evo Crossbars On 2017 Volkswagen Jetta

Question

Question:

Hello Im looking to find out what Thule AirScreen size I need to fit to my 2017 Jetta 4 door sedan. I have the Thule SquareBar Evo bars. Thank you.

asked by: Massimiliano A

0

Expert Reply:

Since the Thule Square Bar roof rack system for your 2017 Volkswagen Jetta uses 53" Thule SquareBar Evo Crossbars # TH712400 I recommend the 38" AirScreen XT for Thule Crossbars # TH72WV.

You may be able to use the larger 44" AirScreen # TH82WV but you will need to measure the distance inside to inside of your crossbar feet to make sure you have at least 44" of space available.

expert reply by: Samuel C

0

Answer 1

The Thule Airscreen Fairing part #TH22WV is the latest version of the Thule fairing for their roof racks. Mostly the change is for appearance but some of the mounting brackets were redesigned to be a bit more robust. If you have the older style and…

view full answer...

Answer 2

To pick out a fairing you need to measure the distance between the feet of the roof rack and go with one that fits the best between them. Below are the available sizes we offer that are for Thule bars and can fit other crossbars: #TH62WV for a 32…

view full answer...

Answer 3

There are a couple of really good options for roof racks that fit your 2018 Honda CR-V with a naked roof, but the now-discontinued Thule Crossroad Kit would not fit as it is only designed for raised side rails. For a similar rack from Thule that does…

view full answer...

Answer 4

It looks like the Subaru-issued crossbars for the 2021 Subaru Crosstrek are Thule aero bars. I cannot tell if they are WingBar or AeroBlade crossbars. Either way, though, the AirScreen XT that you referenced will work. However, the particular one…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 10

Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...