Square U-Bolt Kit for Mounting Leaf Springs SP-177275 to 1-1/2 Inch Square Axle
Question:
I am replacing the leaf springs on an old boat trailer. I have selected Slipper leaf springs 1 -3/4 inch SP177275 but I am uncertain on U-Bolt selection. A mounting plate is already welded to the 1 1/2 inch square axle. I have selected U-Bolt mounting kit CE23102 as the closest I could find on your web site. Am I on the right track or is there a better choice to mount these springs? Thanks.
asked by: Wynn W
Helpful Expert Reply:
You have done your homework because you are on the money with the correct U-bolt kit to mount the 2-Leaf Slipper Spring w/ Radius End for 1,000 lb Trailer Axles - 24-5/8" Long # SP-177275.
The kit you mentioned, the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles # CE23102 will work wonderfully for this application so you're all set.
I have added links below to video reviews of both products as well if you'd like to check them out.
Products Referenced in This Question
CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 2000 lbs
- Square Axle - 1-1/2 Inch
- 3/8 Inch Diameter
- 3-3/8 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 48 8 tire
- Video: Review of etrailer 2 Leaf Slipper Spring - e36SR
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23102 Review
- Video: Redline Trailer Suspension 115983 Review
- Search Results: hubs for 1 inch spindle
- Q&A: U-Bolts And Mounting Plates For A 1-1/2" Square Trailer Axle
- Q&A: Center Hole of U-Bolt Plate Isn't Large Enough Troubleshooting
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Shop: Karrier ST205/75R15 Radial Trailer Tire with 15" Silver Mod Wheel - 5 on 4-3/4 - Load Range C
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Shop: 1-1/2" Square Trailer U-Bolts (Qty 2)
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Q&A: How to Order The Correct Slipper Springs For A 1970s Harding Boat Trailer
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Q&A: Replacement Hook Style Leaf Spring for Trailer
- Q&A: Slipper Spring Recommendation for a Kayak Trailer
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Search Results: 25580
- Shop: Trailer Wiring
- Search Results: leaf spring
- Article: Most Popular Wheel Bearings
- Search Results: safety chains
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: equalizer
on Trailer Suspension Parts
