Weight Capacity of Timbren Axle-Less Suspension System # A20RS545

Question

Question:

The Axle-less trailer suspension part number A20RS545 is rated at 2000lbs - my question - is that weight rating per axle or total trailer weight?

asked by: George A

0

Expert Reply:

Each unit (right and left side of trailer) is designed to replace one 2000 lb axle. This means that the total weight applied to the axle-less system (trailer weight plus the weight of the load carried in the trailer) cannot exceed 2000 lbs. Timbren makes axle-less systems designed to replace up to a 3,500 lb axle.

You can see other systems we offer by clicking the provided link.

expert reply by: Mike L

0

Answer 1

The Timbren Axle-Less Trailer Suspension #A20RS545 can absolutely be used for a tandem axle application. Adding a pair of these axles would give you a 4,000 capacity for your trailer. You would remove the stock suspension and The Timbren kit will…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 5

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 6

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 7

To choose the correct trailer axle for your application you will first need to measure the Hub-Face (A in picture) and Spring-Center (B in picture) measurements on your current axle(s). Since 800 kg converts to about 1,764 lbs I recommend looking at…

view full answer...

Answer 8

Off road tires tend to have a more aggressive tread pattern and can be wider/taller. Generally speaking most all trailer tires are regular tires. There are some turf tires and off road tires out there that would fall into this category but if you are…

view full answer...

Answer 9

The Timbren Axle-Less Trailer Suspension #ASR2KHDS09 you're looking at is actually not going to work with your trailer tires since this kit is only going to work with trailer wheels that are 16" or larger. So, instead I'd recommend going…

view full answer...

Answer 10

Since you want to use a larger wheel size you'd need to go with the higher rated Timbren Axle Less kit part #A35RS545. The wheel flange on the smaller hubs of the other kit can't accommodate the larger wheel diameters.

view full answer...

Answer 11

The Dutton-Lainson Rigid Mount Marine Jack #DL22507 has an inner diameter of 1 3/4", has an inner post length of 19" and and outer post length of 21 1/4". I've also included the dimensional drawing as well for you to check out.

view full answer...

Answer 12

Our largest wheel and tire we carry I recommend using for the Timbren Axle-Less Trailer Suspension #A20RS545 is the Karrier ST205/75R15 Radial Trailer Tire with 15" Aluminum Wheel #KE27JR. This is our largest wheel diameter with the 5 on…

view full answer...