Which Timbren Rear Suspension Enhancement System for 2018 Ford F-150

Question

Question:

The Timbren 6K and 7K Capacity Rear Suspension Enhancement System for my 2018 Ford F150 2 wheel drive TFRTT1504E and TFR1504E are the same price, any issue going with the heavier 7K Kit versus the 6K Kit? Thanks.

asked by: DOUGLAS A

0

Expert Reply:

I understand the temptation to want to go with the higher rated Timbren kit part # TFRTT1504E over the # TFR1504E for your 2018 Ford F-150 but in reality going with a higher weight rating will basically just make your ride quality much harsher whereas the lower rated kit will do a better job of balancing suspension support and ride quality.

expert reply by: Jameson C

0

Answer 1

The main difference between the Timbren Suspension Enhancement System #TFRTT1504E and the Timbren Rear Suspension Enhancement System #TFR1504E on your 2022 Ford F-150 is going to be the weight capacity and purpose the system is intended for. The…

view full answer...

Answer 2

Since you're not planning on towing all the time, I recommend going with the Timbren Rear Jounce-Style Springs #TFR1504E because they install very easily and the system is basically maintenance free. Since there are no air bags to fill, there…

view full answer...

Answer 3

Actually the Timbren Rear Suspension Enhancement System Item #TFR1504E that you referenced is the recommended kit for both the 4x2 and 4x4 versions of your 2018 Ford F-150 FX4. This kit has a spacer that you can remove if you find that the ride is…

view full answer...

Answer 4

For your 2018 Ford F-150 the Firestone Ride-Rite Air Helper Springs #F2582 will work perfectly. These heavy-duty air springs feature a 4,800 pound load-leveling capacity and will do a great job of getting your truck back to level and smoothing out…

view full answer...

Answer 5

The best option to retain factory unloaded ride quality is with air bags because you can easily let air out when you're done towing or hauling to get back to the factory ride quality. There are other systems on the market which can be adjusted…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...