Recommended Bed Mount Camper Tie-Downs For 2017 Ford F-250 SuperCab

Question

Question:

Thanks for your help. I have a 2017 F-250 SuperCab, with running boards under the cab, only, no steps. The truck has a -in hard plastic bed liner. I would like to know which Brophy Tie-Downs to buy, please. Your website mentions both HSSF and HSWB. Thanks!

asked by: Chris K

0

Expert Reply:

Thank you for the information on your 2017 Ford F-250 Super Cab!

I recommend the Brophy Clamp On Camper Tie-Downs # HSWB since been test fitted and confirmed to fit a 2017 Ford F-250.

The Brophy Clamp On Camper Tie-Downs # HSSF you were looking at are more of a generic fit but will not fit with your drop in bed liner.

I also recommend adding the Brophy Basic Turnbuckles w/ Hardware # TDHP to secure your camper to the tie down points.

I included a video of the Brophy # HSWB for you to take a look at.

expert reply by: Samuel C

0

Answer 1

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 2

I checked with Brophy and they recommend using the #HSSF for trucks like yours that have an aluminum bed, which will work with your truck as long as there is two inches of clearance under the lip of the bedside, as shown in the provided diagram. For…

view full answer...

Answer 3

The Brophy Clamp On Camper Tie-Downs #HSAB are a universal fit designed for full-size, non-dually trucks with a few other restrictions but you can still measure to see if they would be a fit for your F-250 based on the dimensions displayed below. We…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

I would be happy to. To flat tow your 2017 Ford F-250 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item…

view full answer...

Answer 9

Hey David; I checked directly with Pace Edwards for you and can tell you that the rails on the Pace Edwards Switchblade Retractable Hard Tonneau Cover #PE46QJ will protrude just under 3/4" on both sides when installed on your Ford Super Duty…

view full answer...

Answer 10

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 11

I spoke with my contact at Brophy and they stated you'll be fine using the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSWB as long as the railing on the back of your 2008 Chevy Silverado isn't over…

view full answer...