Recommended Custom Fit Vehicle Wiring Harness For 2020 Chevrolet Trax LS

Question

Question:

hello. I received wiring kit Curt brand #56419 for my 2020 trax, from you but the pigtails are different than mine. I suspect i gave the wrong information about my car. I have an LS, which uses an 8 point rectangular socket, but what I received was a 6 point square socket. May I return it? If so, how? thanks for your help.

asked by: David K

0

Expert Reply:

We can definitely get you the correct vehicle wiring harness.

The Curt T-Connector # C43FR you have is for the LT and Premier Models of the Chevrolet Trax. The Tekonsha T-One # 118751 you were looking at is for an LT or Premier Model as well.

Since your 2020 Chevrolet Trax is an LS Model you will need to the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118659.

I included a video of the Tekonsha T-One # 118659 being installed on a 2020 Chevrolet Trax and a picture of the Tekonsha T-One # 118659 showing the correct 8 pin connector for you to take a look at.

expert reply by: Samuel C

0

click to enlarge

Answer 1

First you will want to verify your connector to determine which of the 2 connectors you have. The Tekonsha T-One Vehicle Wiring Harness #118751 is confirmed to fit the LT and Premier Trims of your 2020 Chevrolet Trax. The connectors are different as…

view full answer...

Answer 2

As the Draw-Tite #DT32GR is the only hitch currently available for your 2022 Chevy Trax, it is definitely pretty straight forward. The wiring is slightly more difficult, but I do mean slightly and you will know which one is correct shortly after…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Recommended Custom Fit Vehicle Wiring Harness For 2020 Chevrolet Trax LS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching