Whats the Difference between Waste Valves # 34466ND14BBR and # 34466ND14AAR ?

Question

Question:

what is the difference between items: 34466ND14BBR and 34466ND14AAR ?

asked by: Rob M

0

Expert Reply:

The LaSalle Bristol # 34466ND14AAR Waste Valve is the female version where the black water inlet is 3-1/2" INSIDE diameter, whereas the # 3446ND14BBR has a 3-1/2" OUTSIDE diameter. I have attached a photo with dimensions of the female version.

If you are replacing this waste valve you will probably want to cement on a LaSalle Bristol # 34466V293B3 Termination Adapter which has the prongs for a sewer hose with bayonet connection fittings to attach to. The EZ Coupler # D04-0113 ten foot hose is an example. Personally I like to also use a Valterra # T1023 Clearview 90 degree clear adapter so I can see when all the flow is done.

You will need the Oatey # 3447530889 solvent to make connections to the waste valve.

expert reply by: Les D

0

Answer 1

The LaSalle Bristol RV Sewer Termination Adapter part #34466V293B3 has a 3&quot; hub fittings so it is designed to slide over a 3&quot; outer diameter black sewer pipe and can then be fused on using the LaSalle Bristol ABS Solvent…

view full answer...

Answer 2

The picture you submitted looks almost identical to the Valterra RV Sewer Hose Carrier #A04-3460BK. See picture. The replacement cap would be the part #A04-0161BK that you referenced. This is designed to fit a tube that is 4-3/8 inches inner…

view full answer...

Answer 3

The distance between the mounting flanges of the Valterra #T1036-1 is 7-3/8 inches.

view full answer...

Answer 4

Yes, the LaSalle Bristol RV Sewer Termination Adapter, #34466V293B3S slides into your slip hub and glued in place using ABS solvent cement, #3447530889. The LaSalle Bristol RV Sewer Termination Adapter, #34466V293B3 is also available for connecting…

view full answer...

Answer 5

The inner diameter of the female side of the LaSalle Bristol RV Sewer Termination Adapter #34466V293B3 that you referenced is 3 inches.

view full answer...

Answer 6

The long and short of it is that you need to route wiring from the cold side of the stop light switch (only gets hot when brake pedal is pressed) on your dinghy up to the location that you are mounting the RoadMaster Replacement LED Display Monitor…

view full answer...

Answer 7

Yes, you can replace the 3" and 1-1/2" valves on your Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot #34466ND14AAR with the Bristol Waste Valve Body for RV Gray Water w/…

view full answer...

Answer 8

The RV Sewer Elbow #T1039 is designed to connect to two 3" waste lines so you would need a different sewer elbow, like part #T1036 to connector to both waste lines in your current setup. It looks to me like the hub at the bottom of your…

view full answer...

Answer 9

The 510 series is going to be the direct replacement for your 210 series so I recommend picking up the Dometic 510 Full-Timer RV Toilet #DOM29FR for your application. This has the hand sprayer, is a standard height, and comes with the elongated…

view full answer...

Answer 10

I do have a sewer hose storage container that will work with the RhinoEXTREME RV Sewer Hoses part #CAM39867 but the bayonet fittings on the end of this hose are not removable and measure to be 4-1/2" in diameter. Therefore, this hose will…

view full answer...

Answer 11

Hey Gene, we don't have that exact one you're looking for but we do have the Vitrifrigo C85i RV Mini Fridge with Built-In Freezer #VT34FR which is 3.2 cubic feet, runs off of 12V power, and does include a built in freezer.

view full answer...

Answer 12

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're…

view full answer...