Does Install of Curt Echo Mobile Brake Controller Require Running Blue Wire

Question

Question:

If i use curt brake controller #C51180 it looks like I will not need to connect a wire to blue brake wire on the tow vehicle.Is that correct?Also does the controller need to be horizontal,or can it be tilted?

asked by: James B

1

Helpful Expert Reply:

You are correct on both accounts. With the Curt Echo Mobile # C51180 installed in your vehicle you would not need to have the normal brake output circuit (blue) wire ran anywhere on the vehicle since the controller provides all that is needed for that circuit. Also the controller can be tilted when installed which is a common way that 7-ways mounted.

expert reply by: Jameson C

1

Answer 1

As long as the mounting location you choose for the 40 am Circuit Breaker #9510 is in a safe area away from the elements and moving parts it would not matter if it got mounted to a frame or a rubber surface.

view full answer...

Answer 2

The blue brake wire that is normally required to connect to a 7-way for use with a brake controller is not needed for use with the Curt Echo Wireless Trailer Brake Controller #C51180. The only thing the Echo needs are the 12 volt, ground, and turn…

view full answer...

Answer 3

Your 7-way did not also include a brake controller based on what you described. The blue wire you mentioned would have been wired up to the blue wire of the brake controller. Not every trailer that uses a 7-way also uses a brake controller which is…

view full answer...

Answer 4

If you really want to you could connect a 40 amp circuit breaker like part #9510 on the 12V power line of the 1998 Jeep Grand Cherokee but it really isn't necessary. As long as it is OEM wiring on your Jeep then it should be up to the standards…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 11

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does Install of Curt Echo Mobile Brake Controller Require Running Blue Wire

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching