Tandem Axle Lift Kit for Jayco Jay Feather EXP 26L

Question

Question:

Dexter GAWR 2900

asked by: Martin U

0

Expert Reply:

Can you get me the brand and capacity of the axles on your trailer?

expert reply by: Jameson C

0

Martin I.

7/31/2020

Dexter GAWR 2900

Reply

Jameson C.

7/31/2020

Thanks! Based on that the correct lift kit you need is the part # K71-707-02.

Reply

Answer 1

The Torflex Axles on your 2006 Jayco Jayfeather 23B will allow you to add a lift kit and utilize bigger tires. I didn't get your photos, but the measurements you gave will clearly allow this. There is no horizontal movement. You most likely have…

view full answer...

Answer 2

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

view full answer...

Answer 3

The Jayco Jay Feather Lite x17z uses a Dexter Torflex Axle so we do have lift kits available. The correct one is the Torflex Lift Kit part #K71-707-01 for model #10 from 2,300 lbs to 4,000 lbs.

view full answer...

Answer 4

Based on my research, a 2005 Jayco Jay Feather did come with a Torflex torsion axle, and we do have a single axle lift kit that may work. I say "may" because without knowing the exact model axle you have, there isn't a way to guarantee…

view full answer...

Answer 5

We don't have any torsion axles but sometimes you can go with a different angle torsion axle to gain more height. A common change is to go from a 10 degree down to a 45 degree down to gain a couple inches. What brand axles do you have? We may…

view full answer...

Answer 6

We can help you out here, and first, thanks so much for the photo it was super helpful. And based on that I can tell you that your tandem axle trailer with #10 Torflex axles is absolutely compatible with the Dexter lift kit: - Torflex Lift Kit -…

view full answer...

Answer 7

For your Dexter #10 torsion axle, the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift #K71-707-02 is the correct fit. We don't have anything compatible with top-mounted torsion axles so you would first need to weld on the Dexter Axle Torflex…

view full answer...

Answer 8

Technically, a trailer rated for 10,000 lbs can have 5 lug hubs. They are most common on 3,500 lb axles but can be used on the rare 4,000 lb axles as well. You could have a gooseneck or 5th wheel trailer with the 10,000 lb capacity and tandem axle 5…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Tandem Axle Lift Kit for Jayco Jay Feather EXP 26L

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching