Which Lift Kit for Dexter Torflex #10 Axle

Question

Question:

Just want to confirm I order the correct 2-5/8” trailer lift kit. Please see photo of tag on dexter axle. Thank you!

asked by: David R

0

Expert Reply:

Thank you for the photo of the axle sticker; that's always helpful in helping us identify what you've got. That serial number is for a Torflex #10 axle, so the correct lift kit is the # K71-707-01 for a single axle or the # K71-707-02 if you've got tandem axles.

expert reply by: Erik B

0

click to enlarge

Answer 1

In order to choose the correct Torflex Lift Kit for your 2015 Retro Riverside Trailer, you will need to determine the type of axle that it has. We have a couple of single axle lift kits currently available from Torflex. If you have a #9 Torflex axle…

view full answer...

Answer 2

I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the…

view full answer...

Answer 3

Since the sticker on your trailer axle says Dexter Number 10 that means the lift kit part #K71-707-02 is a confirmed fit and would give you an additional 2-5/8 inches of lift. This is the biggest lift we offer for your trailer/axle setup. I attached…

view full answer...

Answer 4

For your 3,500 lb Dexter Torsion axles, you will want to use the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift #K71-707-02. This will provide an additional 2-5/8" clearance. The distance between the mounting bolts is 8 inches center on…

view full answer...

Answer 5

If you have a Lippert 3,500 lb Square Torsion Axle then the correct lift kit is the Axle Riser Kit part #LC382741. That said, none of the Dexter Torflex Lift Kits like part #K71-725-02 will work.

view full answer...

Answer 6

If the bolt holes on your torsion axles side mounted brackets are 8" apart on center then you are going to want to use the Torflex Lift Kit part #K71-707-01 for single axle trailers or part #K71-707-02 for tandem axle trailers. As long as you do…

view full answer...

Answer 7

Based on my research your 2019 Forest River R Pod 176 is equipped with a square 3,500 pound Lippert Torsion Axle for which the Axle Riser Kit #LC382741 will work perfectly. This kit will lift the camper by 3-1/2 inches and all the mounting hardware…

view full answer...

Answer 8

I can tell you how to go about determining if a Lippert Axle Riser Kit will fit your trailer, but these are universal fits, and we don't have any way of knowing what specific axles are on any year, make, or model of trailer. So in order to…

view full answer...

Answer 9

The correct axle riser kit for your Lippert Torsion Axle is the part #LC382741. I confirmed with my contact at Lippert that the spacing for the mounting will match up and it is compatible with your mounting holes being on the top.

view full answer...

Answer 10

The bolt hole spacing on the Torflex Lift Kit #K71-725-02 is 9 inches on center, and 9-1/2' on center. I have attached a photo with these dimensions, as well as a review video for you to check out.

view full answer...

Answer 11

You'd have to measure the height of the brackets that your current axles are attached. The Torflex Lift Kit #K71-725-02 can't attach to brackets that are taller than 3 inches.

view full answer...

Answer 12

There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…

view full answer...

Which Lift Kit for Dexter Torflex #10 Axle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching