Does The HappiJac Truck-Mounted Camper Tie-Downs Come With The Stabilizer Bar?

Question

Question:

hello, Im looking at the Happijac camper tie down brackets for my 2004 Dodge 2004 3500 dually please confirm if this comes with the stabilizer bar # 182928 thank you

asked by: Dave B

0

Expert Reply:

The HappiJac Truck-Mounted Camper Tie-Downs # LC182908-182928 does come with the stabilizer bar. I've included a video showing the contents of this product so check that out!

expert reply by: Adam E

0

Answer 1

We do have a HappiJac set of camper tie downs that do fit your 2004 Dodge Ram 2500 long bed with the part #LC182908-182928 but the part number you mentioned does not fit and would not work.

view full answer...

Answer 2

We have exactly what you're looking to fit your 2003 Dodge Ram 3500 dually with the 8ft long bed and a factory hitch. Have a look at the HappiJac Custom Tie-Downs for Truck Bed Camper #LC182908-182928 which are the front and back tie downs custom…

view full answer...

Answer 3

In regards to HappiJac Truck-Mounted Camper Tie-Downs like part #LC182908-182928, the front tie-down installs inside the bed on the front panel directly behind the cab. The rear tie-down then mounts to the bumper. They will not require removal of the…

view full answer...

Answer 4

The HappiJac Truck-Mounted Camper Tie-Downs #LC182908-182928 cannot be ordered without the rear mounts and stabilizer bar, they are included in the kit. The price can be found directly on the product page.

view full answer...

Answer 5

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 6

Jounce-style helper springs are easier to install than air bags since they're less parts involved. Also, once they are installed you basically leave them alone. Air bags need to have the air pressure monitored and changed according to the load…

view full answer...

Answer 7

Happy to help, and for your 2007 Dodge Ram 25000 with an 8 foot bed, the correct camper tie-downs and turnbuckles are going to depend on a couple things. First, there is an option from Happijac, but please note that the front panel of your truck bed…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 12

For your 2007 Ram 3/4 ton, I'd recommend the Curt #C31017 which would mount to the underside of the frame members and would have the receiver tube sitting directly under the front bumper. I spoke with my contact at Draw-Tite who confirms that…

view full answer...