Does Curt PowerRide Fifth Wheel Hitch 16039 Fit 2020 Ford F-250 OEM Rail Kit

Question

Question:

I have a 2020 Ford F250 with the 5th wheel/goose neck prep package. Was wanting to confirm that PowerRide will work.

asked by: Ben N

0

Expert Reply:

The Curt PowerRide 5th Wheel Trailer Hitch for Ford Towing Prep Package # C48BR does fit the factory rail kit of your 2020 Ford F-250.

expert reply by: Jameson C

0

Answer 1

Personally I prefer the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 over the Curt PowerRide 5th Wheel Trailer Hitch #C48BR. With that said the Curt is rated for 30,000lbs while the B&W is only rated up to 25,000lbs so if you need to tow a…

view full answer...

Answer 2

The Curt PowerRide 5th Wheel Trailer Hitch for Ford Towing Prep Package part #C48BR and B&W Companion OEM 5th Wheel Hitch for Ford Super Duty Prep Package part #BWRVK3305 are both great options for a 2022 Ford F-450 Super Duty 8 Foot Bed with OEM…

view full answer...

Answer 3

The adjustable height range of the Curt PowerRide 30k fifth wheel hitch part #C48BR that you referenced is 13-17 inches so it would work perfectly for you. No pivot is a misused facet name in our page filters. You can disregard that.

view full answer...

Answer 4

Yes, the Curt PowerRide 5th Wheel Trailer Hitch #C36WR is a 30,000lb 5th wheel hitch that will fit the factory prep/puck mounting system in the bed of your 2022 GMC Sierra 3500. This hitch uses built in Wear Plates #C52WR so you will not need a…

view full answer...

Answer 5

For me the Curt PowerRide 5th Wheel Trailer Hitch #C36WR does appear to be the best value. The built in lube plates help to ensure that you protect the hitch from getting marred up when connecting to the 5th wheel. And unlike some other manufactures…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 11

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 12

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Does Curt PowerRide Fifth Wheel Hitch 16039 Fit 2020 Ford F-250 OEM Rail Kit

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching