Availability of Just Bracket Kit of Curt Fifth Wheel Rail Kit # C16427-204

Question

Question:

I have a 2020 Ram 3500 and need fifth wheel brackets to mount my rails to the bed of my truck. I want the Curt C16427-204 kit but I do not need the rails. Do you sell just the brackets and hardware? Thank you,

asked by: John J

0

Expert Reply:

We have just the bracket kit for the Curt rail kit part # C16427-204 with the part # C16427.

expert reply by: Jameson C

0

Answer 1

The 2 inch receiver for the EcoHitch Hidden Front Mount Trailer Hitch #306-X7900 referenced in your question will actually protrude through the grille of your truck. This allows for a really clean appearance while also maintaining your existing…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 11

The canister of the Pace Edwards UltraGroove Retractable Hard Tonneau Cover #PE57CV is 12" tall x 10-1/4" deep.

view full answer...

Answer 12

Yes you can do exactly that; the B&W Companion uses the same #BWRVC3006 head unit on both hitches, and since you already have that head unit from the Companion hitch on your Chevy, you can simply purchase the Companion sliding base that fits your…

view full answer...

Availability of Just Bracket Kit of Curt Fifth Wheel Rail Kit # C16427-204

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching