Foot Pack Recommendation for my Thule ProBar Evos and the Thule Track System

Question

Question:

I have the thule pro bars, and 180r feet pack. I want to mount this on my Camper top using the components I already own. Thank you

asked by: Wade S

0

Expert Reply:

We can get the pro bars installed on the camper but there is not and adapter that will allow us to attach your 480R foot packs to the Thule trac system like part # THTB60.

To make the connection between the two the Rapid Podium Feet for Thule Crossbars part # TH460R are the foot packs to use. These are designed to work with both the track system and the ProBar Evos you have like part # TH713600.

expert reply by: Randy B

0

Answer 1

I'm assuming you're talking about having the Thule Top Tracks for Roof Racks like part #THTB60. If that's the case then the Thule Eye Bolt Tie-Down Anchors #TH37QC would be a compatible option for you. The eye bolts will screw into the…

view full answer...

Answer 2

First of all, that's an awesome off-road trailer, thanks for the photo. As for the 60" Thule Roof Mounted Top Rack System #THTB60, it has tracks which we have measured before and found the inner track to be 0.8" wide and the top opening…

view full answer...

Answer 3

We do not have any photos or visuals on how the Replacement Aeroblade Shim for Thule Hullavator Kayak Carrier, part #TH56JV, attaches, but I can explain it for you. The curved portion is meant to attach upward into the bottom of your older Hullavator…

view full answer...

Answer 4

For you older version of the Thule Hullavator 897XT the only way to attach it to the top channel of aero bars is with the part #TH56JV. The #TH24BH is the channel adapter for the current version of the Hullavator part #TH898.

view full answer...

Answer 5

As you may know, there are no custom roof rack options for a 2016 Dodge Grand Caravan. Therefore, the best and really only option we offer for installing a roof rack and accessories is by installing a set of tracks which require drilling. I see you…

view full answer...

Answer 6

I reached out to Yakima and was informed that there unfortunately is not a compatible landing pad for Q-Towers available so the only way to mount your Yakima crossbars would be to also get new towers. You would also need some tracks to mount on the…

view full answer...

Answer 7

I have a replacement option for you, but I reached out to my contact at Thule and he confirmed that the older Thule Hullavator 897XT you have will unfortunately not fit your new Thule ProBar Evo Crossbars #TH713600. He mentioned that unfortunately…

view full answer...

Answer 8

Yes, the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part #TH898, does work with the Yakima JetStream crossbars. Provided your crossbars extend beyond the Thule foot between 4" and 8". I have included a…

view full answer...

Answer 9

The Thule Hullavator Pro Kayak Carrier #TH898 comes with mounting hardware designed to fit round square, or into the T-Slot of an aero-style roof rack crossbar. If you have the aero-style crossbars and they don't have a T-Slot then you can use…

view full answer...

Answer 10

It is possible to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs part #TH898 on an ARE fiberglass camper shell with tracks. This can be done with either Thule or Yakima products. That said, you'll need to use one where…

view full answer...

Answer 11

You will actually just use the square nuts that come with the Thule Hullavator Pro #TH898 to mount it on your Yakima JetStream bars (see attached photo). I have attached the installation instructions for you to reference for the installation as…

view full answer...

Answer 12

Yes, you'll have no issues using the Thule Hullavator Pro Kayak Roof Rack part #TH898 with the Yakima CoreBar Roof Rack on your 2023 Subaru Forester. There's plenty of overhang for the carrier to swing down and there won't be any bar…

view full answer...