Tonneau Cover And Ladder Rack For A 2020 Toyota Tacoma

Question

Question:

Can this be used in conjunction w/ a tonneau cover?

asked by: Lara

0

Expert Reply:

The combination of a ladder rack with a Tonneau cover on your 2020 Toyota Tacoma is only going to work with one rack. All other racks and tonneau cover mounting locations interfere with each other. To do that you would need one of the following tonneau covers:

- RetraxONE XR Hard Tonneau Cover with Trax Rails - Retractable - Lexan # RTT-60852
- PowertraxONE XR Hard Tonneau Cover with Trax Rails - Retractable - Lexan # RTT-70852
- RetraxPRO XR Hard Tonneau Cover with Trax Rails - Retractable - Aluminum # RTT-80852
- PowertraxPRO XR Hard Tonneau Cover with Trax Rails - Powered - Retractable - Aluminum # RTT-90852

To add a rack to the Trax rails on these covers you will need the following:

- Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks # Y01155 (this adapter is what limits the rack to 300 lbs capacity)
- Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights # Y01151 OR Yakima OutPost HD Overland Truck Bed Rack Uprights # Y01152 (the former gives you an adjustable rack while the latter will give you a fixed rack)
- Yakima HD Crossbars - 68" # Y01158

If you are wanting a rack with an 800lb capacity like the Thule TracRac TracONE Ladder Rack w Cantilever for Toyota Tacoma - Fixed Mount - 800 lbs Item # TH27000XT-XK4EX, it would have to be installed with out a tonneau cover.

expert reply by: Shane H

0

Answer 1

We carry two 2 inch trailer hitches that fit the 2019 Honda Odyssey: a Curt #C13370, and one from us #e98855. oth of them are basically the same design. When we installed these on a 2018 Odyssey, the ground clearances were both the same. I recommend…

view full answer...

Answer 2

While I am not sure what exact model of Perigon tonneau cover you have or what you mean by the Thule deportee cover, the Thule TracRac TracONE #TH27000XTB is not compatible with tonneau covers. This is because the clamps on the TracONE extend inside…

view full answer...

Answer 3

We do have a really nice selection of ladder racks available that are confirmed to fit your 2019 Toyota Tacoma, however as you mentioned seeing, the sliding TracRac SR system from Thule is not available for this truck. We have actually checked with…

view full answer...

Answer 4

In order to carry elongated items on a 2020 Toyota Tacoma you have a few options. The best option will depend on what type of items you will be carrying. If you are trying to carry lumber, ladders etc. then you will want to go with a ladder rack like…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...