Can the MaxxFan Dome Plus Roof Vent Pull Air In

Question

Question:

I need two fans in my van, and want them to be in/out flow. So can have AC on in the van at the front and outflow the vent at the back to suck the cold air through the van. At night when hot, I want the fan to inflow so I have cool outside air on my face and exhaust out the front.

asked by: Andrew W

0

Expert Reply:

The MaxxFan Dome Plus Roof Vent part # MA00-03810B is an exhaust fan so it can only pull air out. If you are looking for a vent fan that does both you'll have to go with the larger square style like the MaxxFan Plus Roof Vent part # MA00-04002K which can still be installed in a van but more modifications would be needed.

expert reply by: Conner L

0

Answer 1

Because of the high humidity environment around showers and range cooking surfaces, it isn't recommended that a powered vent like the #MA00-04002K fan be used in those areas. The high humidity will dramatically shorten the lifespan of the circuit…

view full answer...

Answer 2

The lid of the MaxxAir Dome Vent part #MA00-3810B is not transparent. It would stick down from the ceiling it is installed on 3.08 inches when you have the vent closed and 2.14 inches when the vent is open. We can't recommend a way to shorten…

view full answer...

Answer 3

The MaxxFan Dome Plus Roof Vent w/ 12V Fan - LED Light #MA00-03810B measures 8.51" wide, has a roof cutout of 6.25" and is 2.93" tall when closed. Attached is a review vide and a diagram depicting these measurements.

view full answer...

Answer 4

There isn't an LED kit for the Ventline Vanair Trailer Roof Vent w/ 12V Fan #VP-543SP but the MaxxFan Dome Plus Roof Vent w/ 12V Fan Item #MA00-03810W comes with an LED light in the bottom ring of the vent. This fan circulates air like a ceiling…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 7

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 8

Hi Eric; the Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger #C52044 will work for your triple axle Kaufmann trailer. This is designed for 1 to 3 axle trailers with electric brakes so triple axle isn't a problem. As long as…

view full answer...

Answer 9

The outer flange that sticks out to mount the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item #MA00-04401M is 16-1/4" x 16-1/4" so as long as you have at least 2-1/2" to 3" of space between the panel…

view full answer...

Answer 10

Yes, for the white version of the MaxxFan Deluxe Roof Vent with 12 volt fan, thermostat, remote and powered lift we have the part #MA00-07000K which is exactly what you need.

view full answer...

Answer 11

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 12

The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be a…

view full answer...

Can the MaxxFan Dome Plus Roof Vent Pull Air In

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching