Replacement Drivers Side Fender for Demco Kar Kaddy SS

Question

Question:

Will this fit the drivers side of my KarKaddy SS? Does it match the original that is on the passenger side?

asked by: Pete M

0

Expert Reply:

We do have the correct replacement fender for your Demco Kar Kaddy SS, though it is different than the part you mentioned, which is for a Kar Kaddy 3. Instead, the correct replacement fenders for your tow dolly are the following:

- Driver Side: Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly # DM5982

- Passenger Side: Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly # DR74FR

expert reply by: Kyle S

0

Answer 1

I apologize for any confusion, but the correct passenger side replacement for a Demco Kar Kaddy SS is the part #DR74FR for the passenger side. This has the LED light on the front of the fender like you mentioned.

view full answer...

Answer 2

While the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly #DM97FR and the Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly #DR74FR are very similar they are not quite the same and you would not want to use the Replacement…

view full answer...

Answer 3

A higher load range tire has a higher ply rating but it will also produce a rougher ride and could have a psi rating that exceeds the capacity of the wheel or, more likely, the valve stem. The size you have now, 225/75-15 load range C, is rated for…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Replacement Drivers Side Fender for Demco Kar Kaddy SS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching