Are Lippert Center Point and Roadmaster Comfort Ride Shocks Compatible

Question

Question:

I have seen photo of shocks with this system. So does this work with the Roadmaster Comfort Ride shock system 2460?

asked by: Craig

0

Expert Reply:

It is possible that the Lippert Components Center Point # LC1565391 can work together with the Roadmaster Comfort Ride Shock Absorbers # RM-2460, though they have never been tested together. An educated guess is that it would be problematic because the shock absorbers attach to the frame of the trailer near the equalizer, and the Center Point's brackets and cushioned equalizer will be too large, and extend out to the point they interfere with the shock absorbers.

What you can use instead is shocks from Lippert as they mount differently, the Lippert Components Bolt-On Shock Kit with Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle # LC281255 or 5,200-lb to 7,000-lb (3") Axle # LC281281

So I recommend using the Lippert shocks along with the Lippert Components Center Point # LC1565391.

This will give you the smoothest ride that is going to do the best job if absorbing movement.

I have added links below to some video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

I reached out to Lippert and they informed me that the Replacement Pneumatic Hose #LC28AF is the same as the CPU00002 from your manual. This is the correct replacement line for your Lippert Center Point #LC1565391. The system has mechanical bag stops…

view full answer...

Answer 2

Hey Ed, thanks for reaching out! The Lippert Center Point #LC1565391 can be installed on your 2024 Alliance Valor but you'll need to verify that it meets the following (found in the installation instructions): "For a standard installation,…

view full answer...

Answer 3

The recommended air pressure for the Lippert Center Point by Trailair Air-Ride Suspension Upgrade #LC1565391 is going to be 5 PSI for every 1,000 pounds. So for your 27,000 lb. trailer you would be looking at 135 PSI. The #LC1565391 only goes up to…

view full answer...

Answer 4

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 5

I would be happy to help you find the correct replacement equalizers for your 2008 Eclipse Attitude 39' Triple Axle Trailer, but unfortunately we do not have a breakdown of the specific components your trailer uses. Instead you will need to…

view full answer...

Answer 6

The Lippert Center Point Air Suspension Upgrade you referenced, part #LC1565391 is compatible with tandem axles up to an 8K capacity, according to Lippert, so the system will work great with your 8K Lippert axles. I've linked to a video where one…

view full answer...

Answer 7

The Lippert #LC1565391 Center Point air suspension is compatible with trailers that have axles up to 8K in capacity with 1-3/4 inch wide leaf springs and standard equalizer hangers that measure at least 2-1/2 Inches in height from the center of the…

view full answer...

Answer 8

This is a really good question but you do not have to install anything beyond what comes with the Lippert Center Point #LC1565391. The 2 inch lift that gets added does not need to be compensated with longer hangers. So with just this kit you'll…

view full answer...

Answer 9

We have the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01 that has a 14k capacity just like what you have that would be a great and easy solution for everything. This will be much smoother, quieter, and feel more controlled…

view full answer...

Answer 10

There is not an equalizer that will give you that height in the center. The #TREQ310 you already have are the tallest standard equalizer with the 4 inch center to center height. If you need to add 2 inches to your system, you will either need to…

view full answer...

Answer 11

The Shackle Strap part #TRSL350 comes as a single strap. There should be 2 shackle straps per spring on a single axle trailer. You would need to order 4 of the part #TRSL350 for a single axle.

view full answer...

Answer 12

We only have the #TRSL350 for a shackle that is 3-1/2 inches long from hole center to hole center. Typically these don't wear out as quickly as you described. Are you tightening the shackle bolts really tight which is causing added friction…

view full answer...

Are Lippert Center Point and Roadmaster Comfort Ride Shocks Compatible

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching