Can Standard Tow Bar Diode Kit fit 2020 Jeep Wrangler

Question

Question:

Do I need a different type diode for a 2020 Jeep Wrangler Sahara with the advanced lighting package?

asked by: Don L

0

Expert Reply:

For your 2020 Jeep Wrangler you can use a standard diode kit like the part # RM-152-98146-7. You do not need anything different for the lighting setup that you have.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The extra loose red wire that comes with the brake light relay #RM-88400 attaches to the hot side of any fuse that has power only when the ignition is on. So the red wire from the relay will go into the yellow in line fuse. One end of that extra…

view full answer...

Answer 2

Both the Roadmaster Direct-Connect Base Plates #RM-521453-5 and the Crossbar-Style Base Plates #RM-521453-4 will fit your 2020 Jeep Wrangler Unlimited perfectly (as long as you have the factory plastic or steel bumper). The difference between the…

view full answer...

Answer 3

For your 2021 Jeep Wrangler the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles, #RM-152-98146-7 is what I suggest. There is nothing different needed for the lighting setup that you have.

view full answer...

Answer 4

Since you have LED tail lights the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item #RM-152-98146-7 will not work. Instead you'll need the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire…

view full answer...

Answer 5

You will need the Pollak 6-Pole #PK12720 to replace the end on the Hopkins Custom Tail Light Wiring Kit #HM56200. You will cut off the 4-way end and connect the wires inside the 6-pin connector. We do have a Mounting Bracket #PK11771 which will…

view full answer...

Answer 6

What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.

view full answer...

Answer 7

Yes, the Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR is a confirmed fit for your 2020 Jeep Wrangler Unlimited and would plug into your tail lights to transfer the lighting signals from your motorhome to the tail lights of the Jeep…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV - Demco Tabless Base Plate Kit #DM77YV Both will fit your '24…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...