Diode lighting Kit Needed For Flat Towing A 2020 Jeep Gladiator With LED Lights

Question

Question:

Will this kit work with LED tail lights on the towed vehicle. I am going to flat tow a 2020 Jeep Gladiator that has LED lights.

asked by: Robert W

0

Expert Reply:

Since you have LED tail lights the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 will not work.

Instead you'll need the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item # RM-152-LED-7.

expert reply by: Kevin C

0

Answer 1

I've attached an installation video of the Roadmaster Brake Light Relay Kit #RM-88400 for you to have a look at on a similar Jeep Wrangler, where it details the process and where you can find the cold side of the brake light switch to tap into.…

view full answer...

Answer 2

The extra loose red wire that comes with the brake light relay #RM-88400 attaches to the hot side of any fuse that has power only when the ignition is on. So the red wire from the relay will go into the yellow in line fuse. One end of that extra red…

view full answer...

Answer 3

You will need the Pollak 6-Pole #PK12720 to replace the end on the Hopkins Custom Tail Light Wiring Kit #HM56200. You will cut off the 4-way end and connect the wires inside the 6-pin connector. We do have a Mounting Bracket #PK11771 which will make…

view full answer...

Answer 4

For your 2020 Jeep Wrangler you can use a standard diode kit like the part #RM-152-98146-7. You do not need anything different for the lighting setup that you have.

view full answer...

Answer 5

I recommend the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles, #RM-152-98146-7. This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and…

view full answer...

Answer 6

Both the Roadmaster Direct-Connect Base Plates #RM-521453-5 and the Crossbar-Style Base Plates #RM-521453-4 will fit your 2020 Jeep Wrangler Unlimited perfectly (as long as you have the factory plastic or steel bumper). The difference between the two…

view full answer...

Answer 7

For your 2021 Jeep Wrangler the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles, #RM-152-98146-7 is what I suggest. There is nothing different needed for the lighting setup that you have.

view full answer...

Answer 8

Yes, the Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR is a confirmed fit for your 2020 Jeep Wrangler Unlimited and would plug into your tail lights to transfer the lighting signals from your motorhome to the tail lights of the Jeep…

view full answer...

Answer 9

The reason the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 for your 2021 Jeep Wrangler Unlimited does not use a crossbar for the tow bar is due to the design of the removable arms that connect directly to the tow bar instead of requiring a…

view full answer...

Answer 10

What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Diode lighting Kit Needed For Flat Towing A 2020 Jeep Gladiator With LED Lights

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching