Can 2 inch EcoHitch that Fits 2017 BMW X5 be Used with 1-1/4 inch Hitch Bike Rack

Question

Question:

Can this hitch be ordered with the 1.25 inch receiver instead of 2 inch? My bike rack is this size.

asked by: Neil

0

Expert Reply:

For your 2017 BMW X5 there are only 2 inch hitch sizes available like the mostly hidden EcoHitch part # EH44FR that you mentioned. To use this hitch size with your bike rack that was designed for the 1-1/4 inch hitch size you'd want the hitch reducer part # HT02.

expert reply by: Jameson C

0

Answer 1

When selecting a ball mount and 2-inch hitch ball for towing your pop-up camper you will want to choose a ball mount that allows the hitched trailer to remain level. The article I linked for you shows how to choose the right 2-inch ball mount with…

view full answer...

Answer 2

I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7178 for your 2013 Toyota Prius. To install this on your Prius you'll need to drill into the heat shield, but otherwise it is a pretty straight forward installation. Then you'll…

view full answer...

Answer 3

For your 2003 Ford E-150 Van, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75703. This trailer hitch receiver is a round-tube design with a black powdercoat finish over an e-coat base for superior…

view full answer...

Answer 4

For your 2019 Kia Sorento we only have 2 inch hitches available since it's a higher capacity vehicle like the Draw Tite part #75908. 2 inch hitches are generally preferred as they have higher towing capacities and more hitch accessories are made…

view full answer...

Answer 5

The only difference between the Curt hitch for your 2016 Honda Odyssey part #C13068 and the etrailer #e98862 is the powdercoat finish. The Curt has a gloss black finish and the etrailer has a matte finish that is harder to damage. Aside from that…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I can certainly help you out. The TW is the tongue weight. This is the weight of the trailer at the coupler that attaches to the ball mount on the trailer hitch. It should be 10 to 15 percent of the GTW or gross trailer weight. The gross trailer…

view full answer...

Answer 8

The best trailer hitch option we have for an International 3800 School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16. This hitch is a great option as it can be bolted-on (once drilled) or welded, the brackets can…

view full answer...

Answer 9

For your 2014 Hyundai Tucson there are a few options for trailer hitches. I would go with the Draw Tite part #75717 as it has the highest capacities and best price but I can explain the differences too. The Curt hitches part #C13120 and #C13066 are…

view full answer...

Answer 10

The torque spec for the Curt Trailer Hitch Receiver part #C13143 which is a fit for a 2015 Lexus RX 350 can be found in the installation instructions attached below. It's subject to change but currently listed at 86 ft-lbs. If you need a torque…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

view full answer...

Can 2 inch EcoHitch that Fits 2017 BMW X5 be Used with 1-1/4 inch Hitch Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching