Anti-Rattle Hitch Lock that Can Fit 2-1/2 inch Trailer Hitch

Question

Question:

My hitch is a 2 1/2 inch with a 2 inch spacer . Will this stop the wobble caused from the spacer

asked by: DEAN H

0

Expert Reply:

The best option for an anti-rattle hitch lock that fits a 2-1/2 inch hitch is the Lets Go Aero part # SHP2040-XL which has the added length you would need. The # e99047 is not long enough for your application.

expert reply by: Jameson C

0

Answer 1

The anti-rattle hitch lock you referenced, part #SHP2040-XL does not carry a weight rating, but it is only compatible with ball mounts that have hollow shanks. Ball mounts with hollow shanks usually have a maximum capacity of 7500 lbs, so 7500 lbs…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…

view full answer...

Answer 4

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There are a select few fifth wheel hitches that have replacement leg kits that would adapt them to fit the OEM prep package of your Dad's 2023 GMC Sierra 3500 but I would need to know what hitch you guys have to be able to determine if that's…

view full answer...

Answer 9

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball mount. On…

view full answer...

Answer 10

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 11

The original B&W Tow & Stow, like the #BW54FR didn't work well with your tailgate, as the front face of the shank would contact the tailgate which isn't good. The excellent news is that B&W has developed a Tow & Stow model…

view full answer...

Answer 12

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Anti-Rattle Hitch Lock that Can Fit 2-1/2 inch Trailer Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching