WeatherTech Floor Mats for 2019 Mazda CX-5

Question

Question:

Will 2016 WeatherTech floor mats For Mazda CX-5 fit in 2019 Model?

asked by: Damon

0

Expert Reply:

I checked, and while we do have WeatherTech floor mats that fit a 2019 Mazda CX-5, the mats from a 2016 do not fit a '19 model.

The WeatherTech mats are made to be extremely durable with a rubberized thermoplastic, are made in the USA and come with both the driver and passenger side mats. The mats that fit your 2019 Mazda CX-5 are the following:

- Black: WeatherTech 3D Front Auto Floor Mats # WT44WR

- Gray: WeatherTech 3D Front Auto Floor Mats # WT47WR

- Tan: WeatherTech 3D Front Auto Floor Mats # WT24WR

expert reply by: Kyle S

0

Answer 1

I have exactly what you are looking for. The Stealth Hitches Hidden Rack Receiver #SH35MR is going to be the perfect hitch for your 2021 Mazda CX-5 if you are not wanting to see your hitch when installed on your CX-5. This hitch has a completely…

view full answer...

Answer 2

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...