Is Curt Hitch 13358 Going to Be Too Recessed When Installed on 2019 Mercedes Sprinter 2500

Question

Question:

Will this hitch come out far enough to work? It looks short to me. The step bumper has all of the cameras for the 360 cameras for the Mercedes nav packagage

asked by: Chuck L

0

Expert Reply:

The Curt hitch part # 13358 is recessed under the step bumper like you can see in the attached picture but it's not recessed to the point it wouldn't work well. It wouldn't interfere with the camera setup either.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We have the Curt hitch part #13358 which is a confirmed fit for your 2017 Mercedes Benz Sprinter 2500 with a factory step. If you check out the attached picture you can see how it fits with the factory exhaust setup.

view full answer...

Answer 2

The Curt hitch part #13358 that you referenced fits the long and short wheelbase versions of your 2016 Mercedes Benz Sprinter 2500 with the factory step bumper. To determine if your spare carrier will fit past the bumper when this hitch is…

view full answer...

Answer 3

The Curt hitch item #13358 is a confirmed fit for your 2016 Mercedes Benz Sprinter 2500 Model 170 with OEM bumper step. The spare tire can be reinstalled after installation and removed when needed without any issues related to the Curt hitch item…

view full answer...

Answer 4

I would be happy to help you find a hitch receiver for your 2021 Mercedes-Benz Sprinter 2500 van with a factory step. In order to haul a trailer you are going to need a wiring harness as well. The Curt item #13358 you were looking at is the best…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

Answer 12

Thanks for the pictures! The best hitch for your 2023 Mercedes-Benz Sprinter 2500 is the etrailer item #e82TR. This hitch is custom fit and bolts to your Mercedes with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Is Curt Hitch 13358 Going to Be Too Recessed When Installed on 2019 Mercedes Sprinter 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching