Could Curt Ball Mount Kit C45534 Fit 2019 Volkswagen Atlas  

As long as your owner's manual for your 2018 Volkswagen Atlas doesn't shoot down a sway-control device then you can definitely use one. Most manufacturers don't say anything about a sway control device because those tend to have less of…

Thank you for providing a photo of your trailer coupler. Trailers should always be level when hitched. If a trailer is out of level when towed it will tend to have more sway. I notice you have weight distribution (WD) lift brackets on your trailer…

When using the Reese Sway-Control Bracket for 2" Ball Mounts part #RP26003 and the Curt Friction Sway Control for Weight Distribution Systems part #17200 together will be perfectly acceptable. It puts a slight side ways force on it but it will…

Thanks for reaching out! What size tire (located on sidewall) is currently on your 2022 Colman Lantern 263BH and what wheel bolt pattern do you have? I tried finding those specs but they aren't readily available anywhere. If you have a specific…

Friction sway control bars are designed to work fine going forward when turning or not but not designed to turn when backing up (backing up straight is fine). It can and likely will damage them because apparently the force being applied to them is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…