Replacement U-Bolt for Draw-Tite Trailer Hitch Receiver 36293

Question

Question:

Im switching my Drawtite trailer from one Avalon to another and I had to cut the 3/8-16 Ubolts required to have proper installation. Do you sell these ubolts separately? Thanks for your help

asked by: Michael H

0

Expert Reply:

In order to obtain replacement hardware for the Draw-Tite Trailer Hitch Receiver part # 36293 which is a fit for a 2000 - 2004 Toyota Avalon we only offer the full kit, the Replacement Hardware Kit part # RHK. Please note, hitch hardware is not reusable so you will need to replace all the nuts and bolts anyhow.

expert reply by: Conner L

0

Answer 1

I do have an option for you to obtain the correct replacement hardware for the Curt Trailer Hitch Receiver part #C13119 which is a fit for a Honda CR-V. That said, you should replace all hardware when the hitch is removed, not just what is not…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 4

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 5

I did find the install video you are looking for and I attached it to this page but it is an older harness that's not still around which is why it's hard to find. You can use it as a guide though for the current harnesses we carry like the…

view full answer...

Answer 6

I am sorry to hear about the issue you are having while using your bike rack. I do have some options for you to display your license plate with the bike rack attached but Thule does not offer any products for this purpose. The vast majority of law…

view full answer...

Answer 7

The Hopkins Wiring #HM11141995 and Curt Wiring #C56331 for your 2011 Dodge Grand Caravan install the same way but the Curt wiring is much more reliable, which is something you can see right away since the Curt has a 1-year warranty and the Hopkins is…

view full answer...

Answer 8

The reason that you cannot find a list of all load ranges and the weight capacity for each in regards to trailer tires is because it will be different for each size. For example, a 205/75-15 tire like part #AM10245 which has a load range D rating is…

view full answer...

Answer 9

The least noticeable trailer hitch we offer for your 2003 Toyota Avalon XLS is the Draw-Tite #36293. This Class II trailer hitch has a towing capacity of 300lbs tongue weight and 3,500lbs towing weight. You will want to be sure that your vehicle is…

view full answer...

Answer 10

You will only have to drill 2 of the 6 holes used for installing Draw-Tite hitch #36293 on a 2000 Toyota Avalon. I have added a link to the instructions below for you to review. The wiring will be done mostly in the trunk, with the exception of one…

view full answer...

Answer 11

In my opinion, the Draw-Tite trailer hitch #36293 has a cleaner look than Curt hitch #C12339. I have included a picture showing the hitches side by side installed on a vehicle for you to compare. The Curt hitch has that bracket that goes beneath the…

view full answer...

Replacement U-Bolt for Draw-Tite Trailer Hitch Receiver 36293

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching