Compatibility of Reese Fifth Wheel Bed Rails with Pro Series Sliding Fifth Wheel Hitch # RP30051

Question

Question:

I have the rails for a Reese 14K Classic installed in my Ford F250 Super Duty. Will the rails for the RP30051 work on what I already has installed?

asked by: Wayne C

0

Expert Reply:

Your existing Reese bed rails will indeed be compatible with the Pro Series # RP30051 sliding fifth wheel hitch you mentioned.

Reese bed rails are also compatible with Curt, Draw-Tite, Hidden Hitch, Valley and Husky fifth wheel hitches.

I have linked you to our Fifth Wheel Towing FAQ article, which you might find helpful.

expert reply by: Mike L

0

Answer 1

We can help you with a 5th wheel hitch base rail kit to allow installation of your B&W Patriot 18K slider hitch #BWRVK3270 in your 2017 Ram 2500 short bed. The easiest install comes with a custom-fit kit made just for your truck. You can use…

view full answer...

Answer 2

This is normal behavior for a 5th wheel trailer hitch. Considering the amount of weight involved and all of the steel components there is going to be some noise. Where the hitch fits in the rails has to have some play. If it was tight you would not…

view full answer...

Answer 3

The B and W Slider hitch that will fit the Reese fifth wheel rails you have installed in your truck bed is the B and W Patriot part #BWRVK3270 which is a confirmed fit and designed for that style of fifth wheel rail.

view full answer...

Answer 4

Yes, the B&W Patriot 5th Wheel Sliding Trailer Hitch #BWRVK3270, which is designed to fit into any brand of industry-standard 5th wheel base rails, will work with the Reese 5th Wheel Rail Adapter for Ram trucks #RP30154. The adapter is rated to…

view full answer...

Answer 5

Yes, the B&W Patriot #BWRVK3270 Fifth Wheel hitch says that it is compatible with Reese base rails.

view full answer...

Answer 6

Yes, you can remove just the head on the B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs Item #BWRVK3270 to make it easier to remove and reinstall. B&W makes a great hitch so you will like the Patriot!

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 12

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Compatibility of Reese Fifth Wheel Bed Rails with Pro Series Sliding Fifth Wheel Hitch # RP30051

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching