Replacement Knob for FVK8011-05 Fantastic Vent Fan Lift Arm

Question

Question:

Will the knob from my original lift arm work with your replacement? Thank you

asked by: BRUCE

0

Expert Reply:

The Replacement Lift Arm for Fan-Tastic Vent Roof Vents # FVK8011-05 is designed to fit vents with domed lids.

I don't know for sure if your original knob you have will fit that lift arm, but I have included the replacement knob that works with that lift arm.

The knob that would be used with this lift arm is Replacement Manual Lift Knob for Fan-Tastic Vent Roof Vent # FVK1142-09

expert reply by: Jeff D

0

Answer 1

Yes the Replacement Lift Arm for Fan-Tastic Roof Vents #FVK8011-05 is the correct part you need. This part is meant to fit with Fan-Tastic products that feature a domed lid, which your Fan-Tastic 4000R has. We also offer the Replacement Lift Arm for…

view full answer...

Answer 2

For a Ventline V2394 roof vent the correct replacement operator with crank handle is the part #BVD0462-00.

view full answer...

Answer 3

Thanks for the photo and based on that it looks to me like you may have had a continuous hinge and would need the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White #BV0554-01, though you are going to want to confirm this is…

view full answer...

Answer 4

Thank you for providing the pictures. The Fan-Tastic Vent Replacement Lift Arm for Roof Vents with Flat Lids item #FVK8014-05 replaces the flat roof vent arm on Fan-Tastic Vents. If you have a Domed shape Fan-Tastic vent you will need the Replacement…

view full answer...

Answer 5

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 6

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 7

Good morning, Don. The 3/4" wide butyl tape is exactly what we recommend for installing a roof vent such as the MaxxFan #MA00-07000K. We actually sell a roof vent install kit part #344270KITW that comes with sealant, screws and a 30' roll of…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 10

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 11

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Knob for FVK8011-05 Fantastic Vent Fan Lift Arm

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching