Parts Needed to Install 7-Way, 4-Way and Brake Controller on 2016 Hyundai Santa Fe Sport

Question

Question:

Hi, I have a 2016 Hyundai Santa Fe Sport. I installed a hitch for our bike rack, but now I want to add all the wiring necessary to pull our camper. I have the 2 plugs w/caps behind the plastic cover on left frame rail, so according to your video, I have the proper factory hook ups. I need everything to pull my camper with the 7 pin round connector, and I also want to pull my boat with the 4 pin flat connector. I need a brake controller for the camper. There are SO many products on your site. I want to be sure that all the various parts will work together. I would prefer plug and play without a lot of splicing. I definitely want a proportional controller, and like the look of the tow pro with the knob. Also, is there a cap available to pop into an unused space with the knob on my dash to keep things clean looking? I looked everywhere on your site for a tech help phone number, but couldn’t find one.

asked by: T.R. R

0

Expert Reply:

So since you have the factory tow package on your 2016 Hyundai Santa Fe Sport the first thing you need is the 7-way kit part # TK24FR that you referenced. This kit comes with wiring for a brake controller install so to install the Redarc Tow Pro Elite part # RED44FR you'd just use the included wiring of the controller to splice then to the brake controller wiring and you'd have a really great and out of the way proportional brake controller.

The only more discrete proportional option would be the Curt Echo # C51180 which basically just plugs into the active 7-way and once synced to your smart phone is ready to tow.

The only way to have both a 7-way and a 4-way would be to swap out the 7-way of the TK24FR and use the part # 30955 in it's place.

expert reply by: Jameson C

0

Answer 1

The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK24FR will give you the wiring needed to remove a factory 4-way connector and install a 7-way harness. You will need a Mounting Bracket #18138 to attach the 7-way to the…

view full answer...

Answer 2

The Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR for your 2020 Kia Sedona is going to come with a Tekonsha brake controller connector. So you will be able to use any Tekonsha Controller like the P2 #90885 or P3 #90195. Or the Redarc…

view full answer...

Answer 3

Yes, if you are not ready to install the Redarc Tow-Pro Elite Brake Controller #RED63RR when you install the Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR on your 2020 Kia Sedona you do not have to install the black battery cable which…

view full answer...

Answer 4

The Curt Trailer Hitch item #C13195 will work with your 2020 Kia Sorento but the wiring harness item #TK24FR will not because you do not have the towing package. Yours has different connectors than the Sorento's with the towing package. To…

view full answer...

Answer 5

The 16 gauge wire of the 7-way kit #TK24FR gets ran through the headliner of the vehicle to the reverse light circuit of the vehicle at the rear of the vehicle. If you don't need the reverse light circuit active on your 7-way you can skip this…

view full answer...

Answer 6

It sounds like you're looking for a solution to provide both a 4 way and 7 way trailer connector on the back of a 2021 Kia Sedona, and we've got exactly what you'll need. I'll start out by saying that the Tekonsha #TK24FR you were…

view full answer...

Answer 7

Yes, your 2019 Kia Sedona without the factory tow package is still compatible with the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter #TK24FR. According to the manufacturer, Tekonsha, this is compatible with all models…

view full answer...

Answer 8

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to take…

view full answer...

Answer 9

Not every 2022 Kia Sorento has the factory wiring for trailer wiring so for your 2022 Kia Sorento the harness you'd want is the Tekonsha part #TK26FR which plugs in behind the rear taillight connectors and does not require factory trailer wiring…

view full answer...

Answer 10

The best way to verify if you have the factory tow package wiring is by visually finding the wiring on your 2011 Kia Sorento. The wiring is located on the drivers side behind the rear tire(see image). There may be a protective cover that will need to…

view full answer...

Parts Needed to Install 7-Way, 4-Way and Brake Controller on 2016 Hyundai Santa Fe Sport

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching