What Brake Controllers are Compatible With Tekonsha 7-Way Harness TK24FR on 2020 Kia Sedona?

Question

Question:

Thank you very much for your prompt response. I have one last question for the moment, hahahaha can you connect another brake controller other than the one you mention?

asked by: Andrés H

0

Expert Reply:

The Tekonsha OEM Replacement Vehicle Wiring Harness # TK24FR for your 2020 Kia Sedona is going to come with a Tekonsha brake controller connector. So you will be able to use any Tekonsha Controller like the P2 # 90885 or P3 # 90195. Or the Redarc Tow-Pro Elite Brake Controller # RED63RR will come with the Tekonsha Adapter # 331-TPH-017 so you can use it with a Redarc controller. If you have a Curt or other brand controller you would need to cut off the connector to use it with your controller.

expert reply by: Bud M

0

Andres H.

2/29/2024

Hi Bud, I already watched the video, that part is very well understood. But I am installing the 7 way and with the brake control, so I have to take some cables to the cockpit on the pilot's side to connect the brake control, but I don't know where to put the cables into the cockpit, now. Under the car there is no, or no visible, hole to put the cables through, do you have any idea where it can be done? If you don't have the answer now, if you can find out for me, I would be very grateful, since I made a fairly large investment and I would like the installation to be good. Thank you very much

Reply

Bud M.

3/1/2024

@AndresH Typically we will go into the cab near the main wiring harness on the front of the cab. This can sometimes be difficult to find as they end up buried in other components but looking at your particular engine bay it looks like it is straight back behind the battery which is helpful since you will also be connecting to power for the harness. I wish we had a video for your exact vehicle but we are limited on what comes into our shop since we don't have relationships with vehicle manufacturers.

Reply

Andres H.

3/1/2024

@BudM Thank you very much for your help. When I do it I will try to make a video to send to you so you can have the most accurate information for another client.

Reply

Bud M.

3/1/2024

@AndresH You're Welcome!

Reply

Andres H.

2/29/2024

Good afternoon Bud, I have a 2020 Kia Sedona and a few days ago I bought the tekonsha TK24FR set from you. I know how to install it, but I wanted to know if you have installed it in a kis sedona, since I can't find where the cable can be inserted into the interior of the vehicle to connect the brake control, which I also bought from you, the tekonsha primus IQ

Reply

Bud M.

2/29/2024

@AndresH We have not installed the Tekonsha OEM Replacement Vehicle Wiring Harness # TK24FR on a 2020 Kia Sedona in our shop. I do see they use the same 2 connectors as the 4-Way # 118269 which we did perform an install video on a 2017 model year which you can see linked near the bottom of the page. The 2 connectors are in the drivers side of the rear bumper cover behind the rear tire. There is no interior vehicle connector as the wiring for the brake controller included with the kit runs from the back of your Sedona to the front where it also ties into a battery supply and ground connection. I hope this information helps you with the installation.

Helpful Links

tv-install-trailer-wiring-2017-kia-sedona-118269.aspx

Reply

Answer 1

Yes, if you are not ready to install the Redarc Tow-Pro Elite Brake Controller #RED63RR when you install the Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR on your 2020 Kia Sedona you do not have to install the black battery cable which…

view full answer...

Answer 2

The typical tire should run about 158 degrees (Farenheidt) once you get going down the road, but this can vary greatly depending on the weight of the trailer, how fast you're traveling, and also driving habits. So while 158 is probably…

view full answer...

Answer 3

It sounds like you're looking for a solution to provide both a 4 way and 7 way trailer connector on the back of a 2021 Kia Sedona, and we've got exactly what you'll need. I'll start out by saying that the Tekonsha…

view full answer...

Answer 4

Yes, your 2019 Kia Sedona without the factory tow package is still compatible with the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter #TK24FR. According to the manufacturer, Tekonsha, this is compatible with all models…

view full answer...

Answer 5

Lets start with what you need to add to your 2016 Kia Sorento. I have two options for adding a 7-way to your vehicle. If you want a plug and play installation, we have the Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR. This would replace…

view full answer...

Answer 6

Since you don't have the wiring, hitch, ball mount, and brake controller yet I am happy to recommend all of these as part of a tow package for your 2019 Kia Sedona. The Tekonsha Prodigy P3 Trailer Brake Controller #90195 is a great option for a…

view full answer...

Answer 7

The easiest way to confirm exactly what factory equipment you have on your 2017 Kia Sedona LX is to ask your local dealership to simply run the car's VIN (vehicle identification number). This tells the dealership exactly what the factory…

view full answer...

Answer 8

I spoke with my contact at Curt who said that the Curt T-Connector #C56332 will fit your 2017 Kia Sedona whether you have the tow package or not. If you don't have the tow package you should still have the connectors. Check under your Sedona on…

view full answer...

Answer 9

For your 2016 Kia Sedona I recommend Curt trailer hitch #C13115. This is a Class III trailer hitch rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight so it can handle your trailer easily. I have included a link to a video…

view full answer...

Answer 10

In order to install a 7-way trailer connector on a 2017 Kia Sedona you will need to start with a 4-way and for this I recommend the Curt T-Connector Vehicle Wiring Harness part #C56332 which is plug-n-play. Then, you can add the 4 to 7-way adapter…

view full answer...

Answer 11

I looked up the towing capacity of your 2016 Kia Sedona and it looks to have a towing capacity of 3,500 lbs so a 2,700 lb camper would be no problem at all. For a hitch you then would want the Draw Tite part #75894 which is a confirmed fit. I…

view full answer...

Answer 12

1. Normally I'd say that your 2016 Kia Sedona would be just fine as long as the pop up has brakes, but since your towing capacity without brakes is only 1,000 lbs it would be a good idea to install one. As far as the warranty is concerned you are…

view full answer...

What Brake Controllers are Compatible With Tekonsha 7-Way Harness TK24FR on 2020 Kia Sedona?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching