Can The Tekonsha Vehicle Wiring Harness Be Installed on 2020 Kia Sedona Without Brake Controller?

Question

Question:

Hello good morning. I have a question: I have a 2020 Kia Sedona, this minivan has the cables to connect a camper ready behind the car, this way you can put a 4-way or 7-way connector. In a YouTube video:etrailer Redarc Tow-Pro Elite Trailer Brake Controller Installation - 2019 Kia Sorento. This video shows how to install a 7-way and also a braking control. The query is If I can install the 7-way one Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector - TK24FR without initially installing the brake control? If possible, would I have to install only the black cable on the battery?

asked by: Andres H

0

Expert Reply:

Yes, if you are not ready to install the Redarc Tow-Pro Elite Brake Controller # RED63RR when you install the Tekonsha OEM Replacement Vehicle Wiring Harness # TK24FR on your 2020 Kia Sedona you do not have to install the black battery cable which powers the brake controller. If you know you are going to install the brake controller sooner than later you might just go ahead and connect the wire to the battery and into the rest of the harness. Then just remove the fuse so when you are ready for the controller you only need to reinsert the fuse to power the Brake Controller # RED63RR.

expert reply by: Bud M

0

Answer 1

The Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR for your 2020 Kia Sedona is going to come with a Tekonsha brake controller connector. So you will be able to use any Tekonsha Controller like the P2 #90885 or P3 #90195. Or the Redarc…

view full answer...

Answer 2

The typical tire should run about 158 degrees (Farenheidt) once you get going down the road, but this can vary greatly depending on the weight of the trailer, how fast you're traveling, and also driving habits. So while 158 is probably…

view full answer...

Answer 3

For your 2016 Kia Sedona I recommend Curt trailer hitch #C13115. This is a Class III trailer hitch rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight so it can handle your trailer easily. I have included a link to a video…

view full answer...

Answer 4

I spoke with my contact at Curt who said that the Curt T-Connector #C56332 will fit your 2017 Kia Sedona whether you have the tow package or not. If you don't have the tow package you should still have the connectors. Check under your Sedona on…

view full answer...

Answer 5

In order to install a 7-way trailer connector on a 2017 Kia Sedona you will need to start with a 4-way and for this I recommend the Curt T-Connector Vehicle Wiring Harness part #C56332 which is plug-n-play. Then, you can add the 4 to 7-way adapter…

view full answer...

Answer 6

Since you don't have the wiring, hitch, ball mount, and brake controller yet I am happy to recommend all of these as part of a tow package for your 2019 Kia Sedona. The Tekonsha Prodigy P3 Trailer Brake Controller #90195 is a great option for a…

view full answer...

Answer 7

The easiest way to confirm exactly what factory equipment you have on your 2017 Kia Sedona LX is to ask your local dealership to simply run the car's VIN (vehicle identification number). This tells the dealership exactly what the factory…

view full answer...

Answer 8

I looked up the towing capacity of your 2016 Kia Sedona and it looks to have a towing capacity of 3,500 lbs so a 2,700 lb camper would be no problem at all. For a hitch you then would want the Draw Tite part #75894 which is a confirmed fit. I…

view full answer...

Answer 9

1. Normally I'd say that your 2016 Kia Sedona would be just fine as long as the pop up has brakes, but since your towing capacity without brakes is only 1,000 lbs it would be a good idea to install one. As far as the warranty is concerned you are…

view full answer...

Answer 10

Lets start with what you need to add to your 2016 Kia Sorento. I have two options for adding a 7-way to your vehicle. If you want a plug and play installation, we have the Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR. This would replace…

view full answer...

Answer 11

It sounds like you're looking for a solution to provide both a 4 way and 7 way trailer connector on the back of a 2021 Kia Sedona, and we've got exactly what you'll need. I'll start out by saying that the Tekonsha #TK24FR you were…

view full answer...

Answer 12

Yes, your 2019 Kia Sedona without the factory tow package is still compatible with the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter #TK24FR. According to the manufacturer, Tekonsha, this is compatible with all models…

view full answer...

Can The Tekonsha Vehicle Wiring Harness Be Installed on 2020 Kia Sedona Without Brake Controller?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching