Where Does the Converter Box for Curt Trailer Wiring Harness On a 2020 Kia Seltos Install

Question

Question:

Where does this install on the 2021 Kia Seltos? Does it go in the taillight well or the inner side body panel?

asked by: Stephanie W

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness part # C89KR which is a fit for a 2020 Kia Seltos contains a converter box which will mount behind the taillights on the outside of the vehicle. The pigtail with green wire will then be run behind the bumper cover in front of the body panel to the other side.

expert reply by: Conner L

0

Answer 1

The correct 4-way trailer wiring for your 2024 Kia Soul is the following from Curt: - Curt T-Connector Vehicle Wiring Harness #C89KR

view full answer...

Answer 2

There are instructions on the product page for the Curt Wiring Harness with 4-Pole Flat Trailer Connector #C89KR, but I've also linked them on this answer for you. This is a fairly simple installation that just requires teeing into the vehicle…

view full answer...

Answer 3

The trailer hitch I recommend for your 2021 Kia Seltos is the Curt Trailer Hitch Receiver #C65FR. I really like this hitch because its crosstube is concealed behind the bumper, as you can see by the accompanying photo. That means that only the…

view full answer...

Answer 4

According to Curt the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C89KR fit all models of the 2020 Kia Soul even with LED lights. This harness will give you a 4-pole flat at the rear of the Kia Soul. I have…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Where Does the Converter Box for Curt Trailer Wiring Harness On a 2020 Kia Seltos Install

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching