Recommended Fulton Fender Mounting Bracket

Question

Question:

What mounting bracket is used for this fender: Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 12inch Wheels - Qty 1 Item # F008582 Thank you

asked by: Steven C

0

Expert Reply:

The Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 12" Wheels - Qty 1 # F008582 will use the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair) # PF1135-BKT-2 for mounting.

expert reply by: Jason S

0

Answer 1

I can help you determine if the Fulton fenders you asked about fit your trailer, but fenders are universal parts and there is simply no way to know what fits any specific year, make and model of trailer (this is actually true for all trailer parts…

view full answer...

Answer 2

It looks like you got the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2 #CE19503-2. Assuming you have 13" wheels you did not order the wrong fenders. However, these do not come with mounting…

view full answer...

Answer 3

The fender mounting brackets to use with the CE Smith fenders part #CE19503-2 are the #PF1135-BKT-2.

view full answer...

Answer 4

The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2, part #CE19502-2, will mount to the existing hardware on your trailer. There will be some drilling involved because the fenders do not have any…

view full answer...

Answer 5

The CE Smith Single Axle Trailer Fender #CE19502 is the one fender that we have that will fit the brackets that you have. This fender is only available in the gray color. The color is molded into the plastic so if you so choose you can replace both…

view full answer...

Answer 6

I attached one picture that shows how some will use the L-brackets part #PF775-BKT-2 to install the Fulton Fenders part #F008582. You will need to drill through the fenders in a couple places to use the brackets as there isn't a bracket setup…

view full answer...

Answer 7

I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey #CE19502-2 and the larger 13" Black #CE19503-2. Both options represent the only color available from CE Smith in the respective sizes.…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Recommended Fulton Fender Mounting Bracket

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching