Can Weight Distribution System Fit on 2020 NuCamp Tab400

Question

Question:

The distance from the center of the hitch to the edge of the propane tank platform is 25.5-26 inches.

asked by: Kai L

0

Expert Reply:

The Fastway Weight Distribution system part # FA92-00-0450 could work on your trailer as the brackets can mount as near as 25 inches to the coupler ball hole.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Anytime the fully loaded and ready to tow trailer weight is greater than 50 percent of the weight of the tow vehicle, using weight distribution should be considered. When you get the pop-up, hitch it to the vehicle and pay special attention to the…

view full answer...

Answer 2

For a weight distribution system that is better quality, easier to use, and lighter than the Pro Series Weight Distribution System you have now, I recommend using the Fastway e2 Weight Distribution. The Pro Series system weighs around 100 lbs whereas…

view full answer...

Answer 3

First, I recommend looking at the owners manual and hitch for your 2006 Toyota Highlander to make sure that both can be used with weight distribution. To choose a weight distribution system you will need to go by the total tongue weight of the set…

view full answer...

Answer 4

We do have the weights of the Fastway e2 Weight distribution hitches. The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 4,500 lbs GTW, 450 lbs TW #FA92-00-0450 you mentioned that you have weighs in at 57lbs, but the weight of…

view full answer...

Answer 5

The Fastway e2 Weight Distribution part #FA92-00-0450 comes with a shank that offers up to 6" of rise. This should be more than enough for your needs. To confirm, simply measure the distance from the ground to the bottom of the trailer coupler…

view full answer...

Answer 6

The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 does allow backing up when installed. Many of the systems from various manufacturers allow this on the systems that don't simply utilize the hanger and chain style bars. The…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 11

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't come with…

view full answer...

Answer 12

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Can Weight Distribution System Fit on 2020 NuCamp Tab400

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching