Trailer Hitch that Fits 2018 BMW X5 Diesel

Question

Question:

Do you have a hitch for this vehicle, note it is a diesel

asked by: Bill

0

Expert Reply:

The Curt hitch part # 13077 is a fit for all models of the 2018 BMW X5 so it would easily fit and work well on your 2018 BMW X5 diesel model.

expert reply by: Jameson C

0

Answer 1

You'd want the Curt hitch part #13077 which actually fits the 2016 BMW X5 models that have the M package as well as the ones without the package. Since you aren't totally sure if you have the M package the hitches are referring to this for…

view full answer...

Answer 2

According to my research, the BMW Trailer Coupling Prep Package S8SLA contain a pre-wired pigtail for use with a plug-in style trailer wiring harness but not the actual trailer wiring harness nor a trailer hitch. That said, this plug-in style trailer…

view full answer...

Answer 3

For your 2017 BMW X5 we do have trailer lighting harnesses like the Curt part #C56190KIT which plugs into the vehicle taillight harnesses for an easy install.

view full answer...

Answer 4

We have some measurements that will help you out. When we installed the Curt Trailer Hitch Receiver #C92WR on a 2021 Volvo XC60 we found that this hitch has 13-3/4" of clearance from the top of the hitch to the ground and sits 3-3/4" from…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Trailer Hitch that Fits 2018 BMW X5 Diesel

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching