Installation of Timbren Suspension Enhancement Springs on 2012 Toyota Tundra 4x4

Question

Question:

I am interested in the timbren suspension system but looking for the type that bolts on the frame instead of the axle! is there a type of style for my vehicle? i have a 2012 Toyota tundra crew max 4x4 5.7! thanks!

asked by: Michael M

0

Expert Reply:

The Timbren Springs for your 2012 Toyota Tundra Crew Max 4x4 like # TABSOSR all install to the spring stack at the rear and not to the frame. The front mounted springs # TABSTOF do however mount to the frame.

All of the rear suspension enhancement options from all our manufacturers mount to the leaf spring stack on your specific truck.

expert reply by: Jason S

0

Answer 1

The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist.…

view full answer...

Answer 2

For your 2018 Toyota Tundra the suspension enhancement I recommend is the Timbren kit part #TABSOSR because this kit installs easily, gives you the suspension support you need to greatly reduce the sag, and because it doesn't require…

view full answer...

Answer 3

I just spoke with my rep at Timbren. The height of the Timbren Suspension Enhancement System - Rear Axle Item #T62FR for your 2010 Toyota Tundra is 3 9/16 inches for the rubber spring portion and 1 5/16 inches for the bracket with a combined…

view full answer...

Answer 4

To help with the sag of your 2016 Toyota Tundra I recommend going with Timbrens, as they are designed to take the brunt of the added weight when you tow. They will engage when needed to counteract both sag and body roll to help level your truck,…

view full answer...

Answer 5

The Timbren Rear Suspension Enhancement System #TTORTUN4 is a great SES that fits your 2018 Toyota Tundra. The Timbren line of SES is really popular and there are several models available. The #TTORTUN4 features heavy duty rubber springs with a 6,000…

view full answer...

Answer 6

For your 2013 Toyota Tundra that is towing a 6,500 lb travel trailer I'd go with the Timbren kit part #TABSOSR to help support the rear of it and reduce sag as this will give you up to an additional 3,600 lbs of support if needed. Other kits…

view full answer...

Answer 7

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…

view full answer...

Answer 8

Yes Tarek, the Timbren Suspension Enhancement System #T75MR will work fine with your 2023 Ford Raptor.

view full answer...

Answer 9

Unfortunately Timbren does not make their Timbren Active Off-Road Bumpstops #TABSOSR kit without the axle bracket, so if you don't need it you'll just ignore it and install everything else. To figure out if you need a spacer kit #T68MR…

view full answer...

Answer 10

I went out and pulled both the Timbren kit part #TTORTUN4 and #TTORTUN4L from our warehouse to measure them for you and found that they both sit exactly 3-3/4 inches tall.

view full answer...

Answer 11

Hey Steve, what you would want is the Timbren kit part #TDDR05 that fits your 2006 Dodge Dakota. This will give your truck additional rear suspension support so that it doesn't sag when towing your travel trailer.

view full answer...

Installation of Timbren Suspension Enhancement Springs on 2012 Toyota Tundra 4x4

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching