Timbren Suspension Enhancement that Fits 2013 Toyota Tundra

Question

Question:

I’m trying to lighten the sag of my 2013 tundra while pulling my 6500 lb travel trailer and am wondering which timbren suspension stops I should purchase?

asked by: Robert

0

Expert Reply:

For your 2013 Toyota Tundra that is towing a 6,500 lb travel trailer I'd go with the Timbren kit part # TABSOSR to help support the rear of it and reduce sag as this will give you up to an additional 3,600 lbs of support if needed. Other kits provide even more support but they would provide a harsher ride quality.

With that said, I think your best option would be the RoadActive Suspension kit part # RAS34FR which provides adjustable support, is easy to install, and also provides the best ride quality and handling loaded and unloaded. By far this is our best recommendation as Timbrens can be somewhat harsh.

expert reply by: Jameson C

0

Answer 1

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 2

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is…

view full answer...

Answer 3

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 4

Tireminder recommends installing the signal booster like what comes with the part #TM89FR close to the middle of the towing rig and as far to the outside as possible. So for a fifth wheel trailer setup you'd want to install it as close to the…

view full answer...

Answer 5

Yep, the fit kits for a Thule roof rack on a 2022 Ford F-250 and 2019 F-150 Crew cab are indeed the same; they're not part 521 though, the correct part number is the following: - Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet - 5271…

view full answer...

Answer 6

We have roof rack options for your 2010 Dodge Grand Caravan but nothing from Rola and none that would attach beneath the rubber strip you mentioned. Instead we have the Thule roof rack part #TH712500, #TH480R, and #THKIT1043 which would be a great…

view full answer...

Answer 7

Hello, Phil. Yes, the bolts that go into the adapters at the end of the arms should be torqued. It looks like those are 5/16" grade 5 bolts so they should be torqued to 18 ft lbs. I have included the torque chart below for your reference.

view full answer...

Timbren Suspension Enhancement that Fits 2013 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching