Rhino-Rack RTC Towers and Crossbars for Camper Shell Tracks on 2017 Toyota Tacoma

Question

Question:

i am looking for just the cross bars and towers not the track for my camper shell, i have the tracks already.

asked by: Michael H

0

Expert Reply:

If you were looking for 54" crossbars, then the Rhino-Rack Roof Rack for Factory Tracks # Y02-480B-NT will work on the existing tracks on your camper shell.

This kit includes the Rhino-Rack Quick Mount Legs # RRRLT600 and the 54" Vortex crossbars. So, it's # Y02-480B without the tracks.

If you prefer longer bars, we also have a kit with 59" long bars # Y02-490B-NT, and 65" long bars # Y02-500B-NT. Either size will also work well for your 2017 Toyota Tacoma with the camper shell.

expert reply by: Carla M

0

Answer 1

The Replacement FootBase for Thule Tracker #753-2149 is what you currently have on the Thule tracks on your Leer shell. This footbase is for the now discontinued Thule Tracker square bar setup. You may be able to piece this system together even…

view full answer...

Answer 2

Yes, the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 #TH460R will allow you to attach aero-style Thule crossbars on top of your Leer topper with Thule tracks. The Rapid Podium Feet will fit right into the tracks. If you need a…

view full answer...

Answer 3

From the sounds of your question, it sounds like you have factory track OEM rails on the roof of your 2015 Jayco 1207UD Say Series camper. If this is the case, I recommend the following parts: - Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero…

view full answer...

Answer 4

The Rhino Rack Roof Rack for Factory Tracks part #Y02-480-NT that you referenced will fit in Yakima roof rack tracks.

view full answer...

Answer 5

The Black Aero Crossbars that are the same as the Silver Crossbars, part #Y02-480-NT that you mentioned, is part #Y02-480B-NT

view full answer...

Answer 6

The Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-490B that you referenced actually comes with the tracks so since you already have Thule tracks on your Leer truck cap you need part #Y02-490B-NT instead.

view full answer...

Answer 7

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT that you referenced is a direct fit for the factory tracks you have on top of your SnugTop camper shell. This comes with everything you'd need too so you wouldn't need any additional…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...