Rhino-Rack Vortex Aero Crossbars for 2017 Jeep Wrangler Unlimited with Factory Tracks

Question

Question:

I want to pick up Rhino roof rack but the cross over bars show as silver and I need them in Black. I have put them in my cartRhino-Rack Roof Rack for Factory Tracks - 2 Aero Crossbars - Silver - 54inch Long Item # Y02-480-NT. I want this setup but in all black.

asked by: Raymond R

0

Expert Reply:

The Black Aero Crossbars that are the same as the Silver Crossbars, part # Y02-480-NT that you mentioned, is part # Y02-480B-NT

expert reply by: Jon G

0

Answer 1

If you were looking for 54" crossbars, then the Rhino-Rack Roof Rack for Factory Tracks #Y02-480B-NT will work on the existing tracks on your camper shell. This kit includes the Rhino-Rack Quick Mount Legs #RRRLT600 and the 54"…

view full answer...

Answer 2

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT that you referenced is a direct fit for the factory tracks you have on top of your SnugTop camper shell. This comes with everything you'd need too so you wouldn't need any…

view full answer...

Answer 3

The Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-490B that you referenced actually comes with the tracks so since you already have Thule tracks on your Leer truck cap you need part #Y02-490B-NT instead.

view full answer...

Answer 4

The Rhino Rack Roof Rack for Factory Tracks part #Y02-480-NT that you referenced will fit in Yakima roof rack tracks.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...